How to set up new nanosat hd

[Snow]

Need help to set up nanosat hd with USB. Factory file 105 and 819 on the when put USB on to the nanosat saying no file. File is unzipped

[wookee]

i put the same files as you and i cant get no friggen tv.soo frustrating

[Snow]

819 not have anything in the file...

[Snow]

Loaded 105 factory setting loaded 810 under installation only option I can go to satelite list antenna set up is blue can not use

[Snow]

110,119,118.7and129 not on the satellite list. This is worst one nanosat hd

[Costactc]

Install v106 then 819 and factory default. Once you do that you will be good to go....it doesn't take much to turn you off on a box does it???????

[xxxjrxxx]

Make sure to extract the files , before downloading them and also make sure to enter the right way the Keys on network, you will endup with 3 ceros at the end 000 but it work like that.

[PremiereElite]

Make sure to extract the files , before downloading them and also make sure to enter the right way the Keys on network, you will endup with 3 ceros at the end 000 but it work like that.

0000 not 3 ;)

[PremiereElite]

And if you need info on this Receiver just type in the search bar NANO HD and a ton of info is available, just do a little research :) gl

[Snow]

And if you need info on this Receiver just type in the search bar NANO HD and a ton of info is available, just do a little research :) gl
We'll I did lots of reading I figured it out thanks for help

[Costactc]

We'll I did lots of reading I figured it out thanks for help

Good to hear you got it going, The nano hd is a bit buggy as most new receivers are but well worth it just for picture quality.

[Snow]

Was not able to get 106v and 819 in the file section. Where I can get 106 and 819.? Thanks for the help

[Costactc]

Here you go:


http://www.satfix.net/showthread.php?153394-Nano-HD-v806-zip


http://www.satfix.net/showthread.php?156784-New-File-Frodo_NANO-HD_819

[Snow]

Thank you so much CostaCtc i will try. 806 is factory file?

[Snow]

Install v106 then 819 and factory default. Once you do that you will be good to go....it doesn't take much to turn you off on a box does it???????

Thanks it is wrking now. V106 and 806 are they same.

[Dsguy]

Is this an mpeg4/h264 receiver capable receiving redpoint125(claro125) and amazonas