ultra HD firm v. 2.46

[maly]

hi mates,
i found on ebay a new jynxbox ultra HD V5+ with firmware v2.46, the seller said that it is an original.
Should i buy it or there is something does not smell good??
it comes with jb200 module (wonder if it is good enough for dish 1000 and Bev) and if i can setup IKS server with no problems and issues.
Thank you mates this is my first post.

[Bob Loblaw]

It is not original unless he means it is an original clone. Jynxbox never made a V5 STB, they stopped at V3 and that is when all the clones hit the market.
With any Jynxbox, be it an original or clone, will need extra power when using it with a 1000.X LNB.

[sunrise]

Dont fool yourself - this is not really a jynxbox. It is made in China and is truly a "cheap" product - it will work but even with the fan- it is heat sensitive. The fan can be very noisy but can be easily correct by putting a something thin on the corners of the fan (like a torn business card) -- the picture on the TV is good and it seems to switch the LNBs ok. I have 2 friends that have one each and the runs to their dish (1000.2) are very short. These are sold for under $120 deliverd and can be bought for $70-$75 in quantities of 10 (maybe 5) It is not a box that I would suggest - I have no confidence it will work for very long. Spend $170 for a Linkbox or even the $200 for a Dreanlink T5. I think (from memory -very poor) that the boxes I saw were 1.5v software but it does work and the boxes come with software pre-installed and as a result should work fine

[maly]

Dont fool yourself - this is not really a jynxbox. It is made in China and is truly a "cheap" product - it will work but even with the fan- it is heat sensitive. The fan can be very noisy but can be easily correct by putting a something thin on the corners of the fan (like a torn business card) -- the picture on the TV is good and it seems to switch the LNBs ok. I have 2 friends that have one each and the runs to their dish (1000.2) are very short. These are sold for under $120 deliverd and can be bought for $70-$75 in quantities of 10 (maybe 5) It is not a box that I would suggest - I have no confidence it will work for very long. Spend $170 for a Linkbox or even the $200 for a Dreanlink T5. I think (from memory -very poor) that the boxes I saw were 1.5v software but it does work and the boxes come with software pre-installed and as a result should work fine

Thank you mates, you were right man, if it needs more power i will buy another box like T5 or linkbox, but i need a box with wifi that work with iks server like the one i have now(SV 360 Premier+SVLan) but no more slot in my router so that's why i need a receiver with wifi connection that is reliable.
Thank you for your time and reply

[Angel Eyes]

Smallest Jynxbox V5+ ! Smart Jynxbox V5+ !
the new version V5+ :

1. to revise the cooling fan question,
2. to offer the more smoothly remote control,
3. the item come with the newest firmware 3.2.46 unique version!

Full HD 1080P H.264 solution
Embedded Dual Core High performance 400Mhz 32bit CPU
128Mb 16 bit DDRII 800 SDRAM
MPEG-2 MP HL video decoder
AVC/H.264 HPL4.1 video decoder
MPEG4 ASP supported
JPEG decoding accelerator
Support 4 Video VDAC, can output YPbPr and CVBS simultaneously
Build-in HDMI with HDCP
Support full HD output
MPEG-1 layers I, II and PCM down-mixing
IEC958 S/PDIF digital output
Digital mute control and volume adjustment
Support Dolby down-mixed 2 channel
Support 2 channel HE-AAC V1
Build-in 2 channel Audio DAC
Dual USB 2.0 host interface
10/100 Mbps Ethernet MAC with RMII
Serial RS-232 Interface
Universal Remote
650mA LNB Output
IR extender Output
MicroSD Card Slot
Built in bracket for Wall Mountable solution

it is good enough for dish 1000

http://www.songtaotech.com/jynxbox/v5/55.jpg