Taking a closer look at north 91 and 82 on this box with its issues

[sg2100]

Had a chance to load 3.1 today and do some deeper testing as to why they are having tough time to fix north epg , i fd and scanned only north with options available to me , since day 1 , 91w has been a pain , i am only able to use blind scan as option to bring in channels , the manual and advanced option for scan produces zero results , when i use auto the progress bar at bottom skips along fast and only picks up 253 at most , when prgress bar reaches 60% it than jumps to 100 % with incomplete results , after doing blind scan it comes out with just over 600 , but when selecting a channel for eg ,,, 2220 , the TP info is incorrect and displays 12228 r 20000. Instead , which could be the reason why epg does not load properly , i tried manually deleting the tps and re organising them , but that option is not offered . Gonna post a few pics and hopes they can understand what to fix or tweak to improove this box 2162221623

[sg2100]

I replaced my Lnbf with a new one , and results were much better . the old eagle aspen dtv+32 lnbf would not bring in all the required tps, and scan poorly resulting in this issue, so i am saying its mostly resolved , Now after replacing and going into channel scan and selecting manual tp scanning , i went through each listed tp over at lyngsat one by one only selecting the ones with data on them from 1 to 32 . I thought this would resolve sorting of tp frequancies . but once i saved each one and went to a channel ...eg 2220 ctvl i selected info and same S%$#T . the info screen once again shows tp 12226 instead of the required 12224 . The pinwheel team needs to add an option to delete tps that are programed in the box in order to list sids in correct order and tps line up correctly , this issue is only with 91w . than perhaps once everything is lined up correctly the epg data will establish , heck i pulled out my old limesat v1 and checked , the epg data channel took me to ch# 2028 , but apparently epg data has moved again to 2199 NTV tp 12428 .

hope this is seen by the team so they can look deeper into it . .. cheers

[Maximum]

Hopefully your on to something, this would be one kick ass machine if they fixed up that epg issue.

[ftv]

Hopefully your on to something, this would be one kick ass machine if they fixed up that epg issue.
This would be one kick ass machine if they open source for end users

[granpaw]

Hopefully your on to something, this would be one kick ass machine if they fixed up that epg issue.

Please Pinwheel Team, and thank you for looking into this all important issue. If fixed this would without a doubt be one of the best boxes out there. As it is...very frustrating just sitting in the closet.