2 receviors

[hotrod]

useing 2 bell dishes set for 1 recevior,1 dish 129/ 1 dish110/11

i want to ad a secound fta downstaries , bouth dishes are useing standerd duel lnb s and

a standered 4in 1 out switch

whats my best easies option

can i use 2 sw21?

[Terryl]

Get a standard 4x4 switch, but it has to be one with an external DC power supply.


What type/brand of LNB's are they? Dish DP?, Bell legacy? or other type?, this is important as the LNB type determines the switch type needed.

And if I read your post correctly you have 3 dual output LNB's right? One on a separate dish for 129 and two on a dish aimed at 110/119, correct?

[hotrod]

Bell legacy
i also have dp+ lnbs and several rca 4 way multi switchs, and the type bell uses

[hotrod]

sorry that switch is a rca sw34 4 way

[Terryl]

OK. if the LNB's are all legacy then the SW34 switch will not work, it should have 6 inputs (two for each LNB) and 4 outputs, this would be a SW64 switch. (3 legacy LNB's to 4 receivers)

If you have 3 DP+ LNB's then you need a DP44 switch.

[hotrod]

thanks for all your help I have 2 of those as well funny what you find at the flea markets lol