Limesat hd air acting weird! I need help!

[pastorebo]

When I plug in my limesat hd air and go to the satellite setup page the signal bars at the bottom are moving up and down with out me plugging in the satellite cable. I tried another box and it does the same thing. Any body else having that problem? Because when I do plug in the satellite cable the box picks up no signals.

[Terryl]

If you unplugged the coax from the switch/LNB with the AC power on (without turning it off with the switch in back) then you may have blown your Diseqc switch, if you have one.

The bouncing "S" and "Q" signal bars without a coax connected to the LNB in on the receiver is normal, it's the AGC circuit in the receiver trying to find a signal to lock onto.

[pastorebo]

Hey Terrly thanks, I'll check it out.