SVHD
07-09-2014, 08:54 AM
HOW TO SET UP MEGA TVi SHD3000 HD
Make sure you have your 8psk installed.
If the box is brand new you will have to put on the latest file to see the whole Menu.
To put the file on make sure your usb stick is formatted to Fat32.
Place it in the box.
Go to Utilities,
Down to Update Tool..click OK.
By default the top will say application then under that your usb stick use the down arrow on remote to go to the file in File List.
Click OK the file will start to load. Leave it till its done.
Now go back into Utilities in Menu and go to System Recover and perform a full factory reset.
Then when it comes back on go into Configuration. Select your AV output for your tv.
When done press Menu button.
Then go to Time Setup and do your time. Press Menu when done.
Now go into Scan then Dish Setting and set up your sats. When done go to Search Mode and click OK on remote. Go to start search and wait till its done.
When it is done it will go to a ch. You have to go back into menu to Dish setting to to the next sat to scan after you set that one up.
Continue doing that till all your sats are scanned.
Next its time to set up your internet. Go into Utilites then Internet Setting Choose how you want to connect the box using the remote on Inferface. You have options for just Ethernet Wire...WIFI or 3 G
Next go into Utilites Go to server Setting and set up your private server. When its done hit the yellow button. Then hit the Menu button.It will ask to save say Yuppers.
You can set up the IPTV TO. Its also in Sever Setting and if internet is on the box it should already be filled on. Click Re-Connect to make sure it is connected.
Exit back to TV to a working ch ..if you see a pic on tv your good to go
Make sure you have your 8psk installed.
If the box is brand new you will have to put on the latest file to see the whole Menu.
To put the file on make sure your usb stick is formatted to Fat32.
Place it in the box.
Go to Utilities,
Down to Update Tool..click OK.
By default the top will say application then under that your usb stick use the down arrow on remote to go to the file in File List.
Click OK the file will start to load. Leave it till its done.
Now go back into Utilities in Menu and go to System Recover and perform a full factory reset.
Then when it comes back on go into Configuration. Select your AV output for your tv.
When done press Menu button.
Then go to Time Setup and do your time. Press Menu when done.
Now go into Scan then Dish Setting and set up your sats. When done go to Search Mode and click OK on remote. Go to start search and wait till its done.
When it is done it will go to a ch. You have to go back into menu to Dish setting to to the next sat to scan after you set that one up.
Continue doing that till all your sats are scanned.
Next its time to set up your internet. Go into Utilites then Internet Setting Choose how you want to connect the box using the remote on Inferface. You have options for just Ethernet Wire...WIFI or 3 G
Next go into Utilites Go to server Setting and set up your private server. When its done hit the yellow button. Then hit the Menu button.It will ask to save say Yuppers.
You can set up the IPTV TO. Its also in Sever Setting and if internet is on the box it should already be filled on. Click Re-Connect to make sure it is connected.
Exit back to TV to a working ch ..if you see a pic on tv your good to go