2 legacy dual lnb + 2 dishpro twin

[punk99]

Hi guys need your help please
At the moment I have 82 and 91 with 2 legacy dual lnb. I just use 1 coax from each lnb to a 4x1 chieta switch to connect my nfusion hd.
But in my garage I have 2 dish pro twin. I want to connect 110 and 119.
What other satellite should I connect?
I plan to add 2 other receiver so I will have 3.
what is the best setup to use all my things?

[Mavrick]

Get rid of the legacy dual lnbs & 4x1 chieta, use your 2 dish pro twin lnb's (one to 82 & 91......and one to 110 & 119). Run them both to a DPP44 powered switch which gives you 3 outputs for receivers and one output for the A/C.

[punk99]

thanks alot

[punk99]

i think of something else.
by the time i bought a dpp44 and a new receiver
can i use my 4x1 chieta and my 2 dish pro twin for 119-110-82-91?

if yes is it like that
port #1 and 2 = 119 and 110,
port #3 and 4 = 82 and 91

[torpainter]

i think of something else.
by the time i bought a dpp44 and a new receiver
can i use my 4x1 chieta and my 2 dish pro twin for 119-110-82-91?

if yes is it like that
port #1 and 2 = 119 and 110,
port #3 and 4 = 82 and 91

your chieta wont work properly with the internal diseqs An ecoda 0/22 will

[Mavrick]

i think of something else.
by the time i bought a dpp44 and a new receiver
can i use my 4x1 chieta and my 2 dish pro twin for 119-110-82-91?

if yes is it like that
port #1 and 2 = 119 and 110,
port #3 and 4 = 82 and 91


Depending on your receiver you might run into a power issue running 2 DP twin lnb's and switches, that is why the powered DPP44 might be your best bet. You can try Torpainter's idea with a 22Khz switch (1 for each receiver) and see if you have issues.

[punk99]

Thanks guys.
I installed my 2 dp twin with ecoda 0/22 and it works very well on 82-91-110-119.
i can now use 2 receiver. if i want 3 i will buy dpp44