Jynxbox v4 and power inverter

[DJMark]

I have a v4 and currently I am only running 91, 110, 119. I want to ad HD 82 and 129. What would I need to do this successfully?

[whoknows]

You could find a larger dish that would have more l n b but you would first have to go to dish pointer to see if you can receive them. A t90 may do the job. Otherwise a couple more bell dish and a 0/22khz switch to an extra disq switch and you would have a small dish farm. A motor to move the dish is an option, but when changing channels(satellites) you do have to wait for dish to move. Can ba a pain. good luck

[DJMark]

I know my HD dishes are aligned properly, but when I scan 82 and 129 I only get around 20 channels on each sat. Am I doing something wrong?

And I do have a dish farm already...lol... 1 for 110/119, 1 for 129, 1for 82and 1for 91. So 4 dishes in total.

[whoknows]

When you say you "get" 20 channels. Are they HD and are they viewable? Did you try running coax straight to the 129 l n b to see if you can scan in more channels?

[Terryl]

For a 5 LNB setup (if they are all single LNB's and not DP twins) I would use an EMP 8x1 Diseqc switch.

Most of the new FTA receivers can use the Diseqc 1.1 or 2.0 switching, that would get you all 5