JynxBox with DP LNBs

[greeny]

hello
Yes i would like to know also if Jynxbox hd will work with dishpro 500
direct to the box fron lnb withough using external diseq switch?

[iq180]

What jynxbox are you using, not all are the same, V1/V2/V3/V4/ the LNB output is 450mA, the V5/V6/V7/ LNB output is 650mA?

[TurboPirate]

Moved your question to your own thread, here you'll get the help and info you need. TurboPirate

[fn59]

Should have no problem supplying current to a DishPro 500 lnb, if it's a DishPro Plus lnb should still be ok unless a third lnb is added.

[greeny]

At this point i have not bought one yet but considering hd ultra or hd v3

thanks

[iq180]

At this point i have not bought one yet but considering hd ultra or hd v3

thanks
Any new V3 on the market now will be a clone and why buy a V3 that only has 450mA LNB output power when you can buy a V6 clone that has 650mA LNB power output for the same USD amount, in this case more is better.

[greeny]

Thank you !
i an very new to this and i am little scared that it might be hard to get the firmware for the clone one
Don't you think?

[Fibroso]

Thank you !
i an very new to this and i am little scared that it might be hard to get the firmware for the clone one
Don't you think?
On the contrary,all new firmwares are for clone boxes. Most are good for original boxes. Need to be aware of clone kills on some of the original ones. Do some reading in the clone section.

[TurboPirate]

Any new V3 on the market now will be a clone and why buy a V3 that only has 450mA LNB output power when you can buy a V6 clone that has 650mA LNB power output for the same USD amount, in this case more is better.

And I QUOTE, greeny with The V6 you will not need a power inserter this V6 handles de DP, DPP, 1000.2 and 1000.4 with no problems and no overheating, IQ and some of my Latino's friends have done the test with the LNBs mentioned and all outcome are the same, now my advise is buy the V6 from a known seller last week a friend bought a bulk of the V6 and it didn't have the JB200+ it had a regular JB200 tuner, so far the only seller that has granted warranties and have kept his words is liuta, so from him you'll get the real thing. TurboPirate

[greeny]

And I QUOTE, greeny with The V6 you will not need a power inserter this V6 handles de DP, DPP, 1000.2 and 1000.4 with no problems and no overheating, IQ and some of my Latino's friends have done the test with the LNBs mentioned and all outcome are the same, now my advise is buy the V6 from a known seller last week a friend bought a bulk of the V6 and it didn't have the JB200+ it had a regular JB200 tuner, so far the only seller that has granted warranties and have kept his words is liuta, so from him you'll get the real thing. TurboPirate
could you give me the link of the site(liuta) that i can order one

Thanks..

[TurboPirate]

could you give me the link of the site(liuta) that i can order one

Thanks..

It's on eBay, seller's name is liuta.

[iq180]

It's on eBay, seller's name is liuta.
Just wanted to add that liuta has the V6 for less than 100 USD with free shipping.

[ruwired]

Can't find a liuta on ebay found an liutao600 is that what u meant or did he change his name to that?

[iq180]

Can't find a liuta on ebay found an liutao600 is that what u meant or did he change his name to that?
Yes that's the one you are looking for, it will take about 2 weeks to get it.

[ruwired]

Thank just ordered one have been playing with a jynxbox ultra hd lite but I am unable to run my dish 1000.2 and I am hopping the new receiver can handle this. The only other thing I wish they would do is add CC. If they did that in my mind they would have the best receiver.

[uppadharmai]

Should be fine. If you're using a dpp44 switch, then use power inserter before the receiver

[ruwired]

I am not using a dpp44 I am straight in from the dish. Thanks

[TurboPirate]

Thank just ordered one have been playing with a jynxbox ultra hd lite but I am unable to run my dish 1000.2 and I am hopping the new receiver can handle this. The only other thing I wish they would do is add CC. If they did that in my mind they would have the best receiver.

The V6 can handle those LNBs with no problem.
With DP44 the Ultra Lite will work no problem, with the V6 no need for the DP44. TurboPirate

[greeny]

What jynxbox are you using, not all are the same, V1/V2/V3/V4/ the LNB output is 450mA, the V5/V6/V7/ LNB output is 650mA?

hd ultra light

Thanks

[greeny]

The V6 can handle those LNBs with no problem.
With DP44 the Ultra Lite will work no problem, with the V6 no need for the DP44. TurboPirate

Are you saying that i should ad dp44 switch with inserter after dpp lnb for hd ultra light ?
thanks

[Anubis]

hd ultra light

Thanks


Are you saying that i should ad dp44 switch with inserter after dpp lnb for hd ultra light ?
thanks

You are hi jacking someone else's thread. Please start your in your model section.