Now testing jynxbox V7

[iq180]

Well first it comes with the large remote like the one for the v6.
Next the fan is on the wrong side of the JB200+ module/tuner/ and will need to be moved for better cooling.
It has the RCA cable adaptor & the wifi dongle & IR cable for the remote.
It has an HDMI cable with it.
It has a card slot but no card reader.
It has a micro card slot but no card reader.
I will start the testing now and report what I find.

[iq180]

This thing came with CHs pre scanned for SATs 15.0w,22.0w,30.0w,110.0w,119.0w, KU band & 22.0w C band.

[skywalker999]

so it's a v7 after all

[iq180]

so it's a v7 after all
Yes it is and it came preloaded with 3.2.57 firmware, the ebay add has been fixed to say V7 now.
The fan has a buzzzzzzzzzzz noise and will need be relocated and replaced.

[Fibroso]

Yes it is and it came preloaded with 3.2.57 firmware, the ebay add has been fixed to say V7 now.
The fan has a buzzzzzzzzzzz noise and will need be relocated and replaced.
Here a pic of the fan.
http://i48.photobucket.com/albums/f204/fiberman13/CAM00033_zpsf1942c40.jpg (http://s48.photobucket.com/user/fiberman13/media/CAM00033_zpsf1942c40.jpg.html)

[Fibroso]

Another one from a different angle.

http://i48.photobucket.com/albums/f204/fiberman13/CAM00034_zpsd1ba562f.jpg (http://s48.photobucket.com/user/fiberman13/media/CAM00034_zpsd1ba562f.jpg.html)

[iq180]

Here a pic of the fan.
http://i48.photobucket.com/albums/f204/fiberman13/CAM00033_zpsf1942c40.jpg (http://s48.photobucket.com/user/fiberman13/media/CAM00033_zpsf1942c40.jpg.html)
Yep, the fan is 1 1/4 inch wide & 1/4 of an inch thick, I replaced it with one that is 3 inches wide & 3/8 of an inch thick.
I mounted it on the under side of the top cover with a hot glue gun, I got it as close as I could to the tuner blowing air down, now
I have good air flow on the tuner cooling plate and the CPU cooling plate, now all is good.

[Fibroso]

Yep, the fan is 1 1/4 inch wide & 1/4 of an inch thick, I replaced it with one that is 3 inches wide & 3/8 of an inch thick.
I mounted it on the under side of the top cover with a hot glue gun, I got it as close as I could to the tuner blowing air down, now
I have good air flow on the tuner cooling plate and the CPU cooling plate, now all is good.
How about a pic my friend!!!!

[iq180]

How about a pic my friend!!!!
I have been using old fans that I had from old computers & laptop coolers, when I have time to go to Tiger Direct and find a good
fan that will do the job, then I will have a part number to be used and then I will post some pic.

[Fibroso]

I have been using old fans that I had from old computers & laptop coolers, when I have time to go to Tiger Direct and find a good
fan that will do the job, then I will have a part number to be used and then I will post some pic.

Just take a pic with the cell, mail it to yourself,go here
http://s48.photobucket.com/ and upload it, copy and paste it here. It don't matter to me, old or new, we are learning.

[ruwired]

I have been using old fans that I had from old computers & laptop coolers, when I have time to go to Tiger Direct and find a good
fan that will do the job, then I will have a part number to be used and then I will post some pic.

Hi iq180
Do u have any updates on this receiver and your fan fix, I need a fan for my ultra hd lite as we'll can I get one from tigerdirect that is small enough to get under the cover and wire direct into the same plug. Thanks