PDA

View Full Version : Flashing characters on display


toronto9413
10-11-2014, 05:10 AM
Anyone had this happen before? Every second there are different characters that are flashing on the front display. The audio/video from the receiver is working fine. I have to power off the receiver and power it back on to get the flashing text to go away and then it starts up again a day or so later. Is this one of the symptoms that the capacitor replacements can fix?

http://i.imgur.com/lZcqvKy.jpg
bobby
10-11-2014, 07:38 AM
if you have "long channel name selected" for epg it will cause this to happen, try using "short channel name" if using long, this is what I recall being the issue but it has been awhile since using the nfusion HD so could be mistaken but worth a try
toronto9413
10-11-2014, 07:06 PM
Long ch name is already set to off.
rockisdead
10-12-2014, 02:09 AM
Long ch name is already set to off.

I had same issue,no solution yet.
Glatt
10-12-2014, 02:11 AM
A reboot fixed mine!
bgd2
10-22-2014, 01:37 AM
did you ever figure this out? strange that it started happening on mine now too.
theretic
10-22-2014, 11:58 PM
did you ever figure this out? strange that it started happening on mine now too.

use rear switch for on/off stays cooler when not in use,they like to be rebooted often.factory defalt helps...
jets
10-26-2014, 01:22 PM
could be the power supply issue, someone found a failed cap did it, cant find post but if i do will let you know.
Glatt
10-26-2014, 03:18 PM
A power supply cap failure is a Blue light!!