hello need help please wit ilink 9100

[abri]

hello I have an ilink 9100 was working fine my problem sometime the screen in the tv turn black and blury screen and flickering this keep happen sometimes I reset it still doing the same thing scrren on the tv keep going black and flickering is there anyone can help me with that please thank you

[Anubis]

Change your HDMI cable. Sounds like it has gone bad.

[abri]

hi anusbis thank you for get back to me the box its not hd its pvr sometime its also give a black with screen and sound and the screen turn black and flickering like blury sometime the channel come what more can I try

[Anubis]

How is it hooked up to your tv?

[abri]

hi Anubis i change the rca cable still doing the samething black screen and shaking like flickering you thing my box is gone let me

[Anubis]

Make sure your channel setting/video setting on the tv coincides with the box. For example if the box is plugged into video 1 then make sure tv setting is video 1.

[abri]

hi Anubis it is on video 1 it play and it keep giving a black screen blury and black and some time the screen cone and goes dark like flicking I think I lost this box anything else I can do thanks

[Anubis]

If you have another box try it. If it works you know it's the box. If it doesn't then I would start with your cabling from your dish including any switch you have hooked up.
If you don't have another box then start with the cabling as I mentioned to eliminate it as the problem.

[abri]

I will get back to you thanks

[abri]

hi anubis how are you I take the box put it on my 31 inches motorize it still doing it but not too much okay here another problem I have I cant seem to open server 1 whend I press ok it completely locked but I can open the other server port in my box whend I press ok am not sure if the server 1 is causing the problem am not sure I might have a donation number in server 1 but cant connect to it after whend i look theres no factory file for for ilink is9100 let me know thanks if there anything I can do thanks again

[ICEMAN]

Have you tried a different tv set,,
Try and re-load files,
Re check all your connections, and recheck your coaxial cable make sure is not broken or damage

[abri]

chevy how are you I have server 1 is lock cant seen to open it whend I press ok what can I do thanks