EPG on HD Channels Won't Populate

[PMP]

For some reason since the time change my HD channels on South won't populate in the guide. From 9400 to 9600 the guide says no information.

I've tried the yellow button and letting it sit on 239 for up to an hour and all other channels populate but 9400 to 9600 stays at no info.

My north populates well.

Sat settings did not change and are all the same.

I've rescanned all sats and no change.

If I choose a channel like 9453 and let it sit with guide up it will say no information but the channel does work. If I exit the guide and hit info the information shows up. Exit info, hit guide and the info for that one channel has populated but the rest of channels in the epg stay blank.

I'm running: HT_V20 1.00.00
1.02.00

This all started on Sunday with the time change. It worked well before this. All I did was switch off the summer time.

Suggestions?

[hedley]

switch it back to summer time and set the clock time back.

[PMP]

I tried that and have left it on. I'm getting well over 90% no information in the EPG from 9400 to 9600 only. The rest of the channels are fine.

[monchino]

I tried that and have left it on. I'm getting well over 90% no information in the EPG from 9400 to 9600 only. The rest of the channels are fine.
no channel information on those channels, those are lokals hd no epg or information

[torpainter]

I tried that and have left it on. I'm getting well over 90% no information in the EPG from 9400 to 9600 only. The rest of the channels are fine.
Have you tried a hard boot?

no channel information on those channels, those are lokals hd no epg or information

thats wrong

[monchino]

show me facts on that, there no information on local hd on sat 119 or 110 tested on jynx, ilink9500, dreamlinkhd if any one in pr have the information on those channel prove me i'm wrong I will said you right and ofer an apology, ($service)

[torpainter]

OP was talking 129
9400-9600 are not locals
http://www.lyngsat.com/packages/Dish-USA-129W_sid.html Proof enough?

[bobby]

show me facts on that, there no information on local hd on sat 119 or 110 tested on jynx, ilink9500, dreamlinkhd if any one in pr have the information on those channel prove me i'm wrong I will said you right and ofer an apology, ($service)

torpainter is correct, you need to re-read the op's issue again and exactly which channels he is having a problem with as epg info should populate for those channels

[monchino]

need to read "if any one in pr have the information on those channel prove me i'm wrong I will said you right and ofer an apology, ($service)"

[torpainter]

Thread topic is about the EPG on 129
If you can't help the Op stay out of it.

[monchino]

Thread topic is about the EPG on 129
If you can't help the Op stay out of it.

my apology, sir , you was clear I was wrong keep you good job, I'm out

[PMP]

LOL.....wow

Anyway, I have tried a hard reboot. I did a hard boot after changing the summer time back to "on" hoping that would work but no luck. I'm still left with no information. The only way it comes in now is if I chose to watch the channel at the top of each epg page from 9400 to 9600.

Very strange. I'm starting to think I should maybe start over with factory reset and re-load bins........

[PMP]

Did a factory reset and scanned in my birds and all is good with the world again, it works!

Guide for all sats now populate.

Thanks all for the help