Please how to merge 110/119 with 58.ku with 1 switch

[felixramirezreyes]

Hi
Please help me.
I have two dish, one aimed to sat 110 and 119 and other to 58 ku band and have 4 receivers( JynxBox v2).
How to merge all them with switches and just one cable for each receiver.

Please guide me.

[fn59]

One way would be a 9x5 EMP switch. It's a powered switch, so would best be located indoors. Would need 2 cables from each lnb connected to switch.

[Terryl]

If the LNB's pointing at 110 and 119 are the DP type from Dish then all you need is a DPP44 switch and its power inserter, use LNB ports #1 and #2 on the switch for the 110/119 LNB's, and the #4 port on the switch for the 58W LNB.

The DP44 switch will run 4 receivers, however there may be a small problem with the DC power inserter for the switch, the receiver on the #1 port may not like the power inserter in-lone with it.

If this is the case then the DP44 switch can be cascaded with a second DP44 switch.