View Full Version : Best Version of the Jynxbox?
laker
02-27-2015, 11:37 PM
I'm trying to help a friend, he want's to buy a Jynxbox, i have a V4 and happy with it, so my question is what is the best version out there?
thanks for the feedback
iq180
02-28-2015, 12:37 AM
I think the V6 & V7 are the best built jynxbox clone receiver,JMO.
Newfygarge
02-28-2015, 12:22 PM
I think the V6 & V7 are the best built jynxbox clone receiver,JMO.
I second that
Fibroso
02-28-2015, 12:36 PM
I think the V6 & V7 are the best built jynxbox clone receiver,JMO.
Also v10 plus, more like an original but much better.
sassy1
02-28-2015, 09:19 PM
V7 after using 3&4 i think 7 is the best
turtlen
03-01-2015, 03:30 PM
can you update your jynxbox from v3 to v7
iq180
03-01-2015, 03:40 PM
can you update your jynxbox from v3 to v7
Yes you can.
laker
03-02-2015, 03:10 AM
Thanks to all the replies!....looks like v6-7 & 10plus.....out of these 3 versions any one better then the other?
Like picture quality?
Running hot?
component output?
Thanks again
iq180
03-02-2015, 05:26 AM
Thanks to all the replies!....looks like v6-7 & 10plus.....out of these 3 versions any one better then the other?
Like picture quality?
Running hot?
component output?
Thanks again
My V6 & V7 work perfect and have a great pic, my V10 didn't last long enough for me to say one way or the other.
dcapper
03-14-2015, 07:16 AM
Looking to buy one myself but I need one with a component as well as hdmi. Which model would be best for me?
schylla
03-14-2015, 11:24 AM
v6 or 7 hdmi and component
tropicaldahl
03-14-2015, 07:41 PM
Yeah, will never go wrong with a V6 or V7.
dcapper
03-15-2015, 03:27 PM
v6 or 7 hdmi and component
I'm looking on Ebay and the 6 and 7 versions don't seem to have component. Only one's I can find are v10. Is that right?
1969pontiac
03-15-2015, 04:12 PM
I have the v10 and has both componet and hdmi
dcapper
03-15-2015, 04:41 PM
I have the v10 and has both componet and hdmi
How's the guide? I have a Viewsat MaxHD. The guide is amazing but I keep blowing the receivers. My second one just died. I think it's cause I was running through an sw44 and the power draw blew it.
Also, I want to run 5 satellites. 3 through a diseqc then 1 through a sw21 then to the diseqc. Originally I was running through the sw44 but am going through an 3x4 switch now.
iq180
03-15-2015, 05:19 PM
I'm looking on Ebay and the 6 and 7 versions don't seem to have component. Only one's I can find are v10. Is that right?
The V6 & V7 have component out, the cables come with the receiver, one end ot the cable looks like a computer speaker cable and the other end is RCA.
1969pontiac
03-15-2015, 06:23 PM
the guide is okay, i'm using a usb flash drive to get almost a 48 hr guide, right now i have a dish 500 with dpp twin lnb on port 2, on port 1 i have a vip 211 powering the lnb so the jynxbox won't over heat. the dpp lnb's require a lot of amps to work, a little more than the fta boxes can produce. you can cascade the switches so you can view 5 sats. today i'm trying to connect a turbo hd dish that has the 119/110/129 sats. it has the triple dpp lnb with 3 outputs and 1 input, this is where i'm having an issue and will have to read up to find a fix. If i were you i would dump the 44 switch even the sw versions need a lot of amps to power.
iq180
03-15-2015, 07:55 PM
the guide is okay, i'm using a usb flash drive to get almost a 48 hr guide, right now i have a dish 500 with dpp twin lnb on port 2, on port 1 i have a vip 211 powering the lnb so the jynxbox won't over heat. the dpp lnb's require a lot of amps to work, a little more than the fta boxes can produce. you can cascade the switches so you can view 5 sats. today i'm trying to connect a turbo hd dish that has the 119/110/129 sats. it has the triple dpp lnb with 3 outputs and 1 input, this is where i'm having an issue and will have to read up to find a fix. If i were you i would dump the 44 switch even the sw versions need a lot of amps to power.
If you are setting up a turbo hd 3 eye LNB you need to read thread/ bad LNB /.
You need to know if you have an eastern ark LNB or a western ark LNB, the eastern ark LNB will not work for iks.
If you need more help, start a new thread in this section and ask, I will help you setup your dish and your provider receiver & jynxbox.
tubbs
03-15-2015, 11:42 PM
If you are setting up a turbo hd 3 eye LNB you need to read thread/ bad LNB /.
You need to know if you have an eastern ark LNB or a western ark LNB, the eastern ark LNB will not work for iks.
If you need more help, start a new thread in this section and ask, I will help you setup your dish and your provider receiver & jynxbox.
How can you tell if you have a eastern ark or a western ark?
1969pontiac
03-16-2015, 01:17 AM
the western arc uses the 119/110/129...the eastern arc uses 77 and 72 and 61.5
laker
03-16-2015, 04:49 PM
The V6 & V7 have component out, the cables come with the receiver, one end ot the cable looks like a computer speaker cable and the other end is RCA.
V6 & V7 Come with composite not component, the latest model that seems to have component is V10 & V4 pro, look at the back of the unit.
dcapper
03-18-2015, 05:17 PM
V6 & V7 Come with composite not component, the latest model that seems to have component is V10 & V4 pro, look at the back of the unit.
So the only model that comes with HD component connections is V10? I see V11 is released and it doesn't look like it does.
monkeyu
03-18-2015, 08:35 PM
Nice to no. Glad some asked before I did. Going to get v6 or v7, but like to no if it's motor friendly and can u make it free to air while having private server?
dalej88
03-18-2015, 11:35 PM
Nice to no. Glad some asked before I did. Going to get v6 or v7, but like to no if it's motor friendly and can u make it free to air while having private server?
I have a V7 and it runs a motor fine.
tvnut
03-18-2015, 11:43 PM
i have v10 and i had have v3 and v4. v10 has been the best so far this is the first one i would say does a good job
laker
03-18-2015, 11:53 PM
So the only model that comes with HD component connections is V10? I see V11 is released and it doesn't look like it does.
Further research, the V4 & V4 pro have the component output in the back and you can use any over the counter quality component RCA cables, the V10 looks like a R232 to RCA proprietary cable which it maybe hard to get.
dcapper
03-19-2015, 12:30 AM
I saw some v4's on Amazon cheap. Is it worth it to spend the extra for the v10 over the v4?
tvnut
03-19-2015, 12:48 AM
the version 10 is way more stable the v3 and v4 the display would change and even change channels the v10 has never done that the outputs componet and compostive cables have worked great dvr works goods it is the best one i have had yet
laker
03-19-2015, 05:52 PM
the version 10 is way more stable the v3 and v4 the display would change and even change channels the v10 has never done that the outputs componet and compostive cables have worked great dvr works goods it is the best one i have had yet
I have had a V4 (not the pro model) for 1 1/2 years know and is very stable, no problems what so ever, I just order a V4 pro.
buzzie
03-25-2015, 01:19 AM
Hard to say guys there so many different ones out there. Have ran v1,v2,v3 and v7. they all work good. Just got an e-mail that v11 and v12 are being release to see if I was interested in them . Seem to be getting a little more confusing
Full HD 1080P H.264 solution
Embedded Dual Core High performance 400Mhz 32bit CPU
128Mb 16 bit DDRII 800 SDRAM
MPEG-2 MP HL video decoder
AVC/H.264 HP L4.1 video decoder
MPEG4 ASP supported
JPEG decoding accelerator
Support 4 Video VDAC, can output YPbPr and CVBS simultaneously
Build-in HDMI with HDCP
Support full HD output
MPEG-1 layers I, II and PCM down-mixing
IEC958 S/PDIF digital output
Digital mute control and volume adjustment
Support Dolby down-mixed 2 channel
Support 2 channel HE-AAC V1
Build-in 2 channel Audio DAC
Dual USB 2.0 host interface
10/100 Mbps Ethernet MAC with RMII
Serial RS-232 Interface
Universal Remote
650mA LNB Output
IR extender Output
MicroSD Card Slot
Built in bracket for Wall Mountable solution
crazycool
05-22-2015, 04:22 PM
I'm thinking of getting the V6 so where can I get the set up instructions, and the files?
iq180
05-22-2015, 04:30 PM
I'm thinking of getting the V6 so where can I get the set up instructions, and the files?
I would get the V7, it has a fan, as for the files they are in the /all other receiver file section/.
Okay so sometime has gone by and I am looking at buying a jynxbox and the more I read the more confused I get lol. Has anyone had a chance to try the v12 version and if so is it any good? What versions are the best right now I have only been able to find V12 and some V11's for sale at a decent price.
Any recommendations are greatly appreciated!! Thanks in advance!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.