trouble getting 119 and 129

[Foxpac_40]

i have the newer type of satellite dish and when i connect my new jyxnbox v10 i was able to lock the 110 but after trying so way to try and lock into119 and 129 wasnt successful and i changed the port tried different transponder and i also changed the lnb to ocs dp and nothing someone please help i been at it for 2 days now and its driving me nuts

[whoknows]

Newer sat dish doesn't tell us anything. How many L N B are on the dish? Is there a switch? Have you received these satellites in the past? Are you hooked into a provider setup or is this your install? Post all your antenna settings. thanks.

[Foxpac_40]

the dish is a dish 1000has 3 lnbs dont know if there is a yes i am hooked up into a provider set up please help

[whoknows]

Try setting disq #1 for 119
disq#2 for 110 and
disq #3 for 129

[steven charles]

i have the newer type of satellite dish and when i connect my new jyxnbox v10 i was able to lock the 110 but after trying so way to try and lock into119 and 129 wasnt successful and i changed the port tried different transponder and i also changed the lnb to ocs dp and nothing someone please help i been at it for 2 days now and its driving me nutsfriend it would help if you posted the settings for sats 110-119-129 to see whats wrong on the settings,and any switches your using on your setup....

[iq180]

the dish is a dish 1000has 3 lnbs dont know if there is a yes i am hooked up into a provider set up please help
If you would post a Pic of your dish & LNBs then we would know how to help you.

[Terryl]

i have the newer type of satellite dish and when i connect my new jyxnbox v10 i was able to lock the 110 but after trying so way to try and lock into119 and 129 wasnt successful and i changed the port tried different transponder and i also changed the lnb to ocs dp and nothing someone please help i been at it for 2 days now and its driving me nuts

The LNB type needs to be OCS-DP on all satellite settings, the switching needs to be Diseqc port #1=119, Diseqc port #2= 110 and Diseqc port #3=129. on 119 use TP 12457, on 129 use TP 12516, these have a couple of open channels and are in SD.

[Foxpac_40]

237012370223702
This is what i was told to do and i still get nothing please help

[iq180]

237012370223702
This is what i was told to do and i still get nothing please help
Can you post a pic of your dish & LNBs, it would help us to help you.

[hedley]

you are 8° too far East or you may have 1000.4 lnbf...are the cones spaced equally apart?

[iq180]

you are 8° too far East or you may have 1000.4 lnbf...are the cones spaced equally apart?
Yep, that's why we need a pic of his dish & LNBs.

[Foxpac_40]

23714
237152371423715
This the satellite I have that is still connected to the service

[steven charles]

that's a 1000.2 dish and dishpro lnbs and use the settings on the other post,and for sat 110 use tp 12282 and port 2,your probably going to need a power inserter and dp44 switch,because the receiver your using is a power hog....

[iq180]

23714
237152371423715
This the satellite I have that is still connected to the service
Yep I think that's a 1000.2 western ark with a DP,Plus LNB.

[hedley]

your dish is not skewed...

[iq180]

your dish is not skewed...
His skew will depend on what part of the world he is in, but from the problem he is having I would say the skew is off too.

[gwrowe]

Go to internet, for dish pointer site, enter your address in top bar, and go to next slot to browse sat list, when you find dish 1000.2, for 110/119/129, click on go it will give you your dish settings, from what I have seen your dish is not pointed and skewed correctly!

[Gates07]

why is he using legacy lnb-ocs-dp setting? isn't he using a dish 1000.2 lnb not a legacy lnb? and shouldn't 22 k be turned on??