Dreamlink T4

[rummy]

I would appreciate any help I can get with my New Dreamlink T4. I have downloaded my bins etc. I have scanned all my channels is good. What am I doing wrong. DN says connected but Bev says no. 91 LMB Power= ON. LMB Type = OCS-DP. LMB Frequency= 11.250. LNB 22 KHz= ON. Diseqc SW 1.0 = 3. Diseqc 1.1 = off. Legacy SW. = Off.
110. LMB Power=On. LMB Type = OCS-DP. LMB Frequency= 11.250. LMB 22 KHz = off. Diseqc SW 1.0 = 2 Diseqc 1.1 is off. Legacy SW. is off.
I have the blue green and red component from sat receiver to the tv. and the white and red ( for the audio ) to the sound bar. DN says scrambled channel. and Bev says not connected.
Does anyone have any idea. Many thanks in advance.

[torpainter]

I would appreciate any help I can get with my New Dreamlink T4. I have downloaded my bins etc. I have scanned all my channels is good. What am I doing wrong. DN says connected but Bev says no. 91 LMB Power= ON. LMB Type = OCS-DP. LMB Frequency= 11.250. LNB 22 KHz= ON. Diseqc SW 1.0 = 3. Diseqc 1.1 = off. Legacy SW. = Off.
110. LMB Power=On. LMB Type = OCS-DP. LMB Frequency= 11.250. LMB 22 KHz = off. Diseqc SW 1.0 = 2 Diseqc 1.1 is off. Legacy SW. is off.
I have the blue green and red component from sat receiver to the tv. and the white and red ( for the audio ) to the sound bar. DN says scrambled channel. and Bev says not connected.
Does anyone have any idea. Many thanks in advance.

you are mixing up hardware and server info
does the correct sat appear in top?
If it does then your settings are correct
You say dn says connected When you hit the ok in server set-up does it connect?
When you go into server set-up is the server turned on?

[rummy]

Thanks so much. My private server had to change the code for me.
you are mixing up hardware and server info
does the correct sat appear in top?
If it does then your settings are correct
You say dn says connected When you hit the ok in server set-up does it connect?
When you go into server set-up is the server turned on?