dreamlink T4

[rummy]

I have my dreamlink T4 working on most channels however my pv's are not coming in. Some have good signal and quality however don't come in. The rest say bad signal. Any idea's on what I should do. I rescanned and rebooted and but the pv's codes in again

[torpainter]

Post your hardware set-up and your settings for your both sats

[rummy]

110 LNB Power: On LNB type : OCS-DP LNB Frequency: 11.250 LNB 22 HZ : off DISEqC 1.0 is 2 DISEqC is off Legacy SW: off
91 LNB Power : On LNB Type : OCS-DP LNB Frequency : 11.250 LNB 22 HZ: off DISEqC 1.0 is 3 DISEqC is off Legacy SW: off

Server Setup both 1 and 2 show my IP from the private server.
My loader & BIn I put in is 0010-02188 P.BIn and 0108-0311P BIn

[torpainter]

110 LNB Power: On LNB type : OCS-DP LNB Frequency: 11.250 LNB 22 HZ : off DISEqC 1.0 is 2 DISEqC is off Legacy SW: off
91 LNB Power : On LNB Type : OCS-DP LNB Frequency : 11.250 LNB 22 HZ: off DISEqC 1.0 is 3 DISEqC is off Legacy SW: off

Server Setup both 1 and 2 show my IP from the private server.
My loader & BIn I put in is 0010-02188 P.BIn and 0108-0311P BIn
are you using dishpro lnbs? whats your hardware set-up?

[dishuser]

110 LNB Power: On LNB type : OCS-DP LNB Frequency: 11.250 LNB 22 HZ : off DISEqC 1.0 is 2 DISEqC is off Legacy SW: off
91 LNB Power : On LNB Type : OCS-DP LNB Frequency : 11.250 LNB 22 HZ: off DISEqC 1.0 is 3 DISEqC is off Legacy SW: off

Server Setup both 1 and 2 show my IP from the private server.
My loader & BIn I put in is 0010-02188 P.BIn and 0108-0311P BInwhat kind of lnb(s) do you have?

[rummy]

I don't know my LNB's I know my limesat that I ran for years worked just fine with all the channels.
I have a Bell Sat and another bigger dish Aliza for the dn.
My Signal is 78 and my quality is 97

[dishuser]

I don't know my LNB's I know my limesat that I ran for years worked just fine with all the channels.
I have a Bell Sat and another bigger dish Aliza for the dn.

then why not use port 1 and 2?

[rummy]

I tried 1 but had bad signal and quality. 2 worked good and so did 3

[torpainter]

do your lnbs have dp printed on them? If not change lnb to single
Also signal has to be blue and not red

[rummy]

I will try single and rescan and reboot and see what happens. I am 70 years old and I am not going on the roof to look.:

[dishuser]

I will try single and rescan and reboot and see what happens. I am 70 years old and I am not going on the roof to look.:
that's what neighbours are for...lol

[rummy]

I am one of the younger ones on the block one old guy is 101 and lives with his son who is 81. I changed to single and rescanned and all is good. Thanks so much.

[hedley]

congratulate your neighbor on his age for us rummy, go through your LNB Type options waiting about 3 seconds on each to acquire a signal, one should change the colors on your bars, if the bars change then look for a sat lock on the top right part of your screen, that should tell you what sat you are locked on, do not scan without a proper sat lock.