Jynxbox V4 Pro with USB WiFi adapter and JB200 Module on Amazon cheap!

[dcapper]

I've had enough of my Viewsat Max HD. Blown two of them. I saw on Amazon a Jynxbox V4 Pro with the USB WiFi adapter and the JB200 module for $59.00 new (12 in stock) and $28.00 used (19 in stock). I just ordered a used one last night. I will post how it works when I get it. If I like it, I'll order a V10 (I need component outputs) Anyone have any input on these units or ordered one of these from Amazon?

hxxp://www.amazon.com/Jynxbox-Ultra-Factory-Installed-Adapter-Antenna/dp/B00OTN12B0/ref=sr_1_1?ie=UTF8&qid=1427908071&sr=8-1&keywords=jynxbox+v4

[bobby]

not sure about the v4 but can tell you the v6 and v7 work really well, I have seen posts about the v10 so some do use it, if you use the search option of the forum you could probably answer your own questions

[Anubis]

Moved the thread to the right section. There are lots of informative posts in this section for you. Just remember, once you buy the clone there is no further support for it nor a non clone.

[iq180]

I've had enough of my Viewsat Max HD. Blown two of them. I saw on Amazon a Jynxbox V4 Pro with the USB WiFi adapter and the JB200 module for $59.00 new (12 in stock) and $28.00 used (19 in stock). I just ordered a used one last night. I will post how it works when I get it. If I like it, I'll order a V10 (I need component outputs) Anyone have any input on these units or ordered one of these from Amazon?

hxxp://www.amazon.com/Jynxbox-Ultra-Factory-Installed-Adapter-Antenna/dp/B00OTN12B0/ref=sr_1_1?ie=UTF8&qid=1427908071&sr=8-1&keywords=jynxbox+v4
You will need a power inserter with the V4, LNB output is only 450mA.
DO NOT LOAD any offical jynxbox firmware newer than 239, they will kill your jynxbox clone.

[dcapper]

You will need a power inserter with the V4, LNB output is only 450mA.
DO NOT LOAD any offical jynxbox firmware newer than 239, they will kill your jynxbox clone.

Thanks!

I am running two 3x4 switches for Bev (out to an sw44 for my 3 subs) (the Jynxbox won't be connected to the sw44) then to an sw21 into diseqc port 4. 119 on port 1, 110 of port 2, 129 on port 3. Can you post me an Ebay or Amazon link (hxxp) for a power inserter please?

[iq180]

Thanks!

I am running two 3x4 switches for Bev (out to an sw44 for my 3 subs) (the Jynxbox won't be connected to the sw44) then to an sw21 into diseqc port 4. 119 on port 1, 110 of port 2, 129 on port 3. Can you post me an Ebay or Amazon link (hxxp) for a power inserter please?
If you have sub receivers hooked to the LNBs then you shouldn't need a power inserter, the sub receivers will power the LNBs.

[dcapper]

If you have sub receivers hooked to the LNBs then you shouldn't need a power inserter, the sub receivers will power the LNBs.

OK. The two 82 lnb's goto one 3x4 switch and the two 91 lnb's go to the other 3x4 switch then to the sw44 which the Bell subs connect into ports 1, 2, and 3. While one 82 and one 91 port off each 3x4 go to an sw21 switch into the diseqc then out to the fta receiver. This make sense? Or is there a better way to hook it up?

[laker]

I've had enough of my Viewsat Max HD. Blown two of them. I saw on Amazon a Jynxbox V4 Pro with the USB WiFi adapter and the JB200 module for $59.00 new (12 in stock) and $28.00 used (19 in stock). I just ordered a used one last night. I will post how it works when I get it. If I like it, I'll order a V10 (I need component outputs) Anyone have any input on these units or ordered one of these from Amazon?

hxxp://www.amazon.com/Jynxbox-Ultra-Factory-Installed-Adapter-Antenna/dp/B00OTN12B0/ref=sr_1_1?ie=UTF8&qid=1427908071&sr=8-1&keywords=jynxbox+v4

Is a really nice box, I have been running a v4 for about 1 1/2 years & it works flawless, I also set up a v4pro and that works great too, I like them because is got all HDMi, Component, & composite output...no special cables needed, just regular RCA connections.
At that price is a great buy!

[Terryl]

Some of the newer receivers don't work too good with the old legacy type LNB's, if you have the old style then it may be time to upgrade to the newer DP LNB's, a DP twin will work for both 82 and 91.

And you can run it into a DP44 switch and run 4 receivers.

[dcapper]

I have an lnb that has 4 spigots on it. Says 1a, 1b, 2a, 2b. I'm assuming that's the one I need to use?

[havenlyskyhigh]

I've had enough of my Viewsat Max HD. Blown two of them. I saw on Amazon a Jynxbox V4 Pro with the USB WiFi adapter and the JB200 module for $59.00 new (12 in stock) and $28.00 used (19 in stock). I just ordered a used one last night. I will post how it works when I get it. If I like it, I'll order a V10 (I need component outputs) Anyone have any input on these units or ordered one of these from Amazon?

hxxp://www.amazon.com/Jynxbox-Ultra-Factory-Installed-Adapter-Antenna/dp/B00OTN12B0/ref=sr_1_1?ie=UTF8&qid=1427908071&sr=8-1&keywords=jynxbox+v4

Did you get your machine yet ? I order one they sent me DOA box a few hours later on I file return it back.
So, if you got one how do it work right now? I want to their box good to sale to customers.

[dcapper]

Did you get your machine yet ? I order one they sent me DOA box a few hours later on I file return it back.
So, if you got one how do it work right now? I want to their box good to sale to customers.


My screen was rolling but I did the steps needed to get my 1080p60 working, but I haven't installed it into my system yet. I think they sent me an original one. It has the green pass sticker. "Made in China" on the back of the remote. Since I don't know much about these, I have no idea if I am to load f/w on it or not?

[havenlyskyhigh]

My order V7 remote in the bx it was brand new but the system seem recondition, and I think [ front page deal was a recondition seller ]. Now I order another one from them let see what happen it said NEW V4 pro it should arrive next week.