Red and Green

[roper7]

turned on reciever from back and red and green lights were blinking and theres numbers blinking
the remote is not working, checked batteris and they are good. what can I do need help

[steven charles]

turned on reciever from back and red and green lights were blinking and theres numbers blinking
the remote is not working, checked batteris and they are good. what can I do need helpfriend if you just bought the dreamlink hd t5 try contacting who you ever bought the box from and tell them the remote came bad,theres been a few of this boxes remotes that came bad,but you can try re-programing the remote control also....

[roper7]

Over a year old
tryed to turn on, hard boot thats the only whey i can turn on red and green light come on together, and the front face where the channels come on all 8888 with the tops are blinking. need all the help

[KIDWCKED]

Over a year old
tryed to turn on, hard boot thats the only whey i can turn on red and green light come on together, and the front face where the channels come on all 8888 with the tops are blinking. need all the help

...load the latest fac file and latest bin...you will prolly need to use the loader found in the file section..

[jokeonyou]

hi guys..
went through the blinking lights scenario.........called the dealer......advice.....
1. disconnect the line from the sats.
2. disconnect the main power.
3. open up rec. and pull the qpsk chip......leave the cover off
4. hook up without the chip...and turn on rec.....
5. this should clear the receiver and it will boot up properly........if it doesn't then you know its the receiver .....
6. replace chip.....making very sure the chip is put in properly.......pay super close attention and make sure pins line up....test it with the cover off.......
7. if everything is cool turn off power and disconnect and then put cover back on...
j

[KIDWCKED]

sure sounds like bootloop...give it a try..

[roper7]

gave it a try and didnot work, but I found out what happened I have a 60in tv and installed the rec
I tryed on a smaller tv and everything came back to normal, so what happened. and also useing compont cables instead of HDMI
on the 60in tv.the dreamlink T5 is working. Thanks for all your help

[jokeonyou]

sometimes all it takes is dropping the cables.......all of them.....
and power off the receiver and then repower it .....don't hook up anything else...and reboot it.....see if the front end clears...
sounds like it has.
j