Log in

View Full Version : Yoooooooo guys......i am here to thankyou....



jokeonyou
04-11-2015, 10:48 PM
boys..
i am in shock......i am watching tv....on 129 HD.......YAhoooooooooooooooooooooo

I finally got one of my servers to work and connect........and i also contacted the other PS....and he informed me all is good....
I am going to get him to resend all my setup data in case i wrote it down wrong...

I am still short 2 sats...still down.....won't tune in.....both are giving me sky high readings but won't tune in....
the readings stay the same even when i point the dish to the ground or turn off the port....don't get it....
But guys...
I want to really thank all of you in participating in this adventure......i have been going through cathode withdrawls for some time........YOU DUDES ARE TERRRRRRRRRRRIFFFFFFFFFIC......
THKS

J......
will be back for more help....right now i thought i would kick back......and watch TV.....hOOOOOOOOOORAHHHHH.
Any ideas about the above problem....pls post.

havenlyskyhigh
04-11-2015, 10:52 PM
You hit lottery jackpot in clear picture

whoknows
04-11-2015, 10:56 PM
There is information on dish install in the hardware section. First tip would be to not go through a switch when aligning dish, go straight through with coax to lnb. good luck

jokeonyou
04-12-2015, 01:33 AM
thks whoknows,,
i have tried this...........no luck.....
i did notice that when i did my last factory reset......that the readings on the sats changed......
before i would get Q 0 to 20.....
after reset ......the Q...jumped to 90 but the sats won't tune in......weird....
I have changed the lnbs....new...
i have changed all the wiring from sats to switch and from switch to receiver..........
i have changed the switch..new.....cheeta...
i have checked the sat that is working from one port to the other to make sure the switch is working and that the ports are OK and yes they seem to be working.......on the sat that this up...which is 129....
110 and 119 are not tuning........
at a bit of a loss.......?????????
any ideas
joke

Nostradamus
04-12-2015, 01:55 AM
the guys would have to know what type of dish /dishes you have setup and the type of LNBs to be of any real help to you