New T5

[rica]

Hi everybody

Just bought new Dreamlink T5. I'm having a problem. I'm trying to set up my sats, and where I

used to get S-65-70 and Q-80% using my Nfusion Phoenix, I can tune in to 119 and 110, where I get around S=50% and Q=47-55% .All i have is scramble channel

After reading most post about T5,my setting should be OK...or because I'm over 75 old,my brain stopped working ??(lol) :noidea:


tia rica

[torpainter]

signal is a hardware issue,scrambled is a server issue
Please post your hardware set-up and settings for your sats

[panmanzaa]

rica,you will save a lot of time if you post ,all sat settings,i know it is a lot to ask,but it should be done...

[rica]

sat110
lnb power on
lnb type ocs-dp (I have tried all types)
lnb freq 11.250
lnb 22khz off
diseqc sw 1.0 2
diseqc sw 1.1 off
legacy sw off


20" dish

sat119 diseqc sw 1.0.... rest as above

[rica]

rica,you will save a lot of time if you post ,all sat settings,i know it is a lot to ask,but it should be done...

Sorry,i'm very slow

[torpainter]

No need to be sorry
are you using dishpro lnbs? two single lnbs?,one twin?

[rica]

No need to be sorry
are you using dishpro lnbs? two single lnbs?,one twin?

Single lnb's and good

[torpainter]

Single lnb's and good

are they dishpro lnbs?
can you bypass the switch and test your signal and quality on each lnb
You will need to adjust your settings

[rica]

i tested separately 110 & 119,just up to 50%.
lnb's are regular from bell-i think.With phoenix i have Q 80%

[torpainter]

lnb should be single then.Did you install the dish or bell?

[rica]

lnb should be single then.Did you install the dish or bell?

Dish network

[torpainter]

Dish network

sorry ,was thinking bev The lnbs are likely dishpro and ocs-dp will be correct.
Sorry I have to go ,someone else should be able to help

[rica]

sorry ,was thinking bev The lnbs are likely dishpro and ocs-dp will be correct.
Sorry I have to go ,someone else should be able to help

Thanks...Good night

[rica]

is there is no solution for my problem or my box is junk ????:nopity:

[torpainter]

check the hd board and make sure its seated properly

[rica]

check the hd board and make sure its seated properly

I did it no change

[rica]

can I check w/out HD board ???

[panmanzaa]

rica try a different diasec swt ...

[rica]

Finally problem solved ...It was HD modem.I got new(after a long "conversation"with the seller) w/better metal heat sinks

[torpainter]

HD modem? You mean board?

[rica]

HD modem? You mean board?

yes modem....

[dishuser]

yes modem....

module not modem

[rica]

module not modem

sorry what i was thinkig

[torpainter]

Anyway glad you got it working