sv-hd8000/lost channels.

[killer1845]

Hello to all, I,m missing these channels on sv-hd8000. 300,301,302,303,305,318,319,320,350,352,353,355, and no ppv channels. this is the setup that i have always used,and when scanning channels it,s shows failed or locked on some of the channels.

Disk Settings:

Satellite : Echostar 14
Lnb type : ocs-dp
Lnb frequency: 11250
22KHZ : off
Lnb power: on
Transponder : 12224
Search option: All
Network search : off
Diseqc : port 1
Motor : Disable
Legacy switch : off

Satellite : Echostar 10,11
Diseqc : Port 2


VERSION INFORMATION:

Product : sv-hd 8000
Boot loader : 02.07
Main software : HD 20E
Front software : vB-07

Please help and thanks in advance to all.

[d1964]

Dish may need tweaking

[steven charles]

Hello to all, I,m missing these channels on sv-hd8000. 300,301,302,303,305,318,319,320,350,352,353,355, and no ppv channels. this is the setup that i have always used,and when scanning channels it,s shows failed or locked on some of the channels.

Disk Settings:

Satellite : Echostar 14
Lnb type : ocs-dp
Lnb frequency: 11250
22KHZ : off
Lnb power: on
Transponder : 12224
Search option: All
Network search : off
Diseqc : port 1
Motor : Disable
Legacy switch : off

Satellite : Echostar 10,11
Diseqc : Port 2


VERSION INFORMATION:

Product : sv-hd 8000
Boot loader : 02.07
Main software : HD 20E
Front software : vB-07

Please help and thanks in advance to all.friend I,m assuming you have dp lnbs by the ocs-dp on settings for sat 119 try tp 12297 instead of 12224 with port 1 because its wrong and for sat 110 try tp 12282 with port 2 for sat 110,and make sure you have good signal and quality,and remember there was a ecm the last couple of days and not all channels might not be up on your server yet....

[steven charles]

Hello to all, I,m missing these channels on sv-hd8000. 300,301,302,303,305,318,319,320,350,352,353,355, and no ppv channels. this is the setup that i have always used,and when scanning channels it,s shows failed or locked on some of the channels.

Disk Settings:

Satellite : Echostar 14
Lnb type : ocs-dp
Lnb frequency: 11250
22KHZ : off
Lnb power: on
Transponder : 12224
Search option: All
Network search : off
Diseqc : port 1
Motor : Disable
Legacy switch : off

Satellite : Echostar 10,11
Diseqc : Port 2


VERSION INFORMATION:

Product : sv-hd 8000
Boot loader : 02.07
Main software : HD 20E
Front software : vB-07

Please help and thanks in advance to all.friend also try posting the settings for sats 110 and 129 to make sure there correct too....

[killer1845]

dont have 129, and echostar 10,11 /110 is the same as 14/119. satellite: echostar 10,11 /diseqc: port 2, as stated above. thanks

[steven charles]

dont have 129, and echostar 10,11 /110 is the same as 14/119. satellite: echostar 10,11 /diseqc: port 2, as stated above. thanksfriend the transponder for sat 110 and 119 should be different you should have for sat 110 you should have transponder 12224 or 12282 which ever gives you better signal and quality with port 2,and sat 119 its transponder 12297 with port 1,put that and rescan the sats,and like I said on the other posts,for sat 119 the transponder its wrong its not 12224 its 12297 with port 1 for sat 14/119...

[killer1845]

12297 keep failing, any way to correct this issue. Thanks

[whoknows]

When scanning you don't have to start on any particular transponder. The box will scan all transponders whether they are dead or alive. The only time you have to change transponder is if you were aligning a dish as some transponders you can't receive so picking one that is alive only makes sense. good luck