Viewsat 9000HD Dish Pro Plus lnb

[freeatlast28]

hello all;llllllllllllllll

[kijiji]

I'm pretty sure your receiver will not power up the lnb you will likely need one of 2 things # 1 a power inserter or # 2 a bell or dish ird.

[Angel Eyes]

Yup that is true ..sub will do it

[kijiji]

you could also swap out for legacy lnb's and use a switch.

[stimpy5384]

i have a viewsat max hd and the same lnb and mine works just fine. yes you use one cable to lnb.

[torpainter]

lnb type will be ocs-dp or dishpro
diseq on and 91 assigned to port 1
diseq on and 82 assigned to port 2

[torpainter]

I'm pretty sure your receiver will not power up the lnb you will likely need one of 2 things # 1 a power inserter or # 2 a bell or dish ird.

shouldnt need a power inserter unless an extra lnb is added to the in port

[kijiji]

shouldnt need a power inserter unless an extra lnb is added to the in port

pretty sure he's going too need one when i had a vs the onlyh way it would power up my dp quad at my cottage was with a p/inserter.

[fn59]

DPP lnb draws less than 500mA. More if another lnb is connect to the input.

[tom47]

been gone from xfta will vs 2000 still work

[Blazerbong]

been gone from xfta will vs 2000 still work

For bev 91 bird,true FTA Mpeg 2,or door stopper.

[tom47]

does G router 802.11G still work with new stb for dn ===brand stb do you like

[Anubis]

does G router 802.11G still work with new stb for dn ===brand stb do you like

You are asking these questions in the wrong place. Go to the general receiver section found here to start off ....http://www.satfix.to/forumdisplay.php?233-General-Receiver-Discussions
There are several posts asking the same question. Right now I would get a Dreamlink or Jynxbox clone.
As for the router I would upgrade it.