Nfusion HD Setup for goo

[whynotboth]

Is this right?

82+91 connected to Ecoda SW22 22Khz Controlled Switch then to port 4 on the disecq.
110 to port 1
119 to port 2
129 to port 3

disecq switch OUT to Nfusion box?

[airjam]

Yes your planned set up is correct:

82+91 connected to Ecoda SW22 22Khz Controlled Switch then to port 4 on the disecq.
110 to port 1
119 to port 2
129 to port 3

[Mavrick]

If you are having issues with this set up reverse your switches around.........

110 to port 1
119 to port 2
129 to port 3
91 to port 4

Then the disecq to one side of the Ecoda SW22 22Khz and 82 to the other side then to the receiver. I found this works better for some receivers.

[whynotboth]

Thanks for the replies! Interesting second option Maverick. You are suggesting what is pictured here ?24860
Will attempt to hook it all up today.

If I have three LNB's on the bracket of one and I'm looking from the direction the dish is pointing should they be

110 119 129?
Left Middle Right

And for the other

91 82
Left Right

?

[airjam]

91 82
Left Right

You have this part in the reverse. Should be

82 91
Left Right

[Mavrick]

Standing behind the dish looking out it should be......

129 119 110?
Left Middle Right

And for the other

91 82
Left Right

Remember, the signal comes in and bounces across the dish to the lnb.......

ATTACH=CONFIG]24863[/ATTACH]