abouttosnap
08-20-2015, 06:55 AM
Menu button (remote)
Installation
Channel search
Example below:
================================
Mode/ switch from Auto to Manual
Tuner/ Tuner1(DVB-S)
Satellite Name/ Per scan (119) Note: Should be set per your setup prior to scan.
Frequency/ 12297
Symbol Rate/ 21500
Polarity/ Horizontal
Modulation/ 8PSK Turbo
FEC/ 2/3
Network Search/ Disable
Search Type/ All
Channel Type/ All
=================================
Start search (blue button)
After the tp scan repeat for additional tp's changing settings as needed.
Possible stb lock up and or reboot during this process...nature of the beast.
Also can be done through Antenna Setup and Motor Setup.
Once in one of these options do a Search (blue button) first
then setup as above and then Start search (blue button)
Installation
Channel search
Example below:
================================
Mode/ switch from Auto to Manual
Tuner/ Tuner1(DVB-S)
Satellite Name/ Per scan (119) Note: Should be set per your setup prior to scan.
Frequency/ 12297
Symbol Rate/ 21500
Polarity/ Horizontal
Modulation/ 8PSK Turbo
FEC/ 2/3
Network Search/ Disable
Search Type/ All
Channel Type/ All
=================================
Start search (blue button)
After the tp scan repeat for additional tp's changing settings as needed.
Possible stb lock up and or reboot during this process...nature of the beast.
Also can be done through Antenna Setup and Motor Setup.
Once in one of these options do a Search (blue button) first
then setup as above and then Start search (blue button)