tp list

[wildone]

somebody posted the tp list on here a while ago good thing i wrote it down cause cant find it now i deleted all my channel and did another factory reset again for i dont know how many times now i reloaded the 27 file in it and i did try to load the updated 27 file and when i did i couldnt get 119 it only gave me 110 and 129 so wasnt helpful at all so thats why did did reset everything and now i look at the tp list that shows the feq,pol,sr,dvb,pilot and on my reciever the freq numbers are different than the ones that had been posted on here are the ones that show from the 27 file that are on my reciever wrong do i need to change all 52 freq so friggin frustrated with this im about to use reciever as a football and go back to pay tv could somebody explain what im doing wrong i have done what everyone has said but its not working on my nfhd system i know this is just another post but if u were in my spot u would be scratching ur head to

[airjam]

Did you upload the Channel file found here.

http://www.satfix.to/showthread.php?188837-NFHD-TP-Fix-for-119-110-27F-Aug-20-15

[nobodyspecial]

there is a tp list posted in general receiver discussion

[wildone]

i did what is says deleted all channels did factory then tried to load update but it wont load i put to usb and then safely remove put it back in comp its there on usb i safely remove it take it to reciever put in reciever and it just shows a yellow line with nothing there i safely remove from reciever put it in comp and it just shows folders with bmp,jpg,pvr, i tried renaming it but it wont stay on usb i tried format an nothing other files stay there but not up date and i tried 2 different ones

[wildone]

what is fat32 mean i dont know not comp wiz thanks

[wildone]

ok tried another usb stick it has the factory restore on it has the old tp list on it has 27 file on it i put the new tp 27 on it and put in recievier and it shows all the old files but the new 27 will not show up on reciever and it shows it on usb on reiever same as before just a yellow line this is driving me nuts tried 3 diff files none will show on reciever but why do old files show that are on the usb

[wildone]

i got this file to load can someone tell me if its the right one 7-1-14nfhd_update_27f_110-119-129.bin cause i finally have some tv but cant get nothing under 300

[The Noof]

There has been a rather heavy ecm, and your iks provider is probably jut getting back up.That would account for the missing channels.

[wildone]

ok ty for the reply

[edrik]

thanks goes to nobodyspecial from general reciever section for this info but, could we continue the info with 129, 91 and 82 tp info? Anybody have it? Thanks! if not is there a good trustworthy non obsolete website to get it?

110w
TP 1 = 12224 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 2 = 12239 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 3 = 12253 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 4 = 12268 L -Spot Beam
TP 5 = 12282 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 6 = 12297 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 7 = 12311 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 8 = 12326 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 9 = 12341 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 10 = 12355 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 11 = 12370 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 12 = 12384 L -Spot Beam
TP 13 = 12399 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 14 = 12414 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 15 = 12428 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 16 = 12443 L / 20.000 MS/s / DVBS QPSK / FEC 7/8*
TP 17 = 12457 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 18 = 12472 L -Spot Beam
TP 19 = 12486 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 20 = 12501 L -Spot Beam
TP 21 = 12516 R / 20.000 MS/s / DVBS QPSK / FEC 7/8
TP 22 = 12530 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 23 = 12545 R -Spot Beam
TP 24 = 12559 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 25 = 12574 R -Spot Beam
TP 26 = 12588 L -Spot Beam
TP 27 = 12603 R -Spot Beam
TP 28 = N/A
TP 29 = 12632 R -Spot Beam
TP 30 = N/A
TP 31 = 12661 R -Spot Beam

119w
TP 1 = 12224 R -Spot Beam
TP 2 = 12239 L -Spot Beam
TP 3 = 12253 R -Spot Beam
TP 4 = 12268 L -Spot Beam
TP 5 = 12282 R -Spot Beam
TP 6 = 12297 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 7 = 12311 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 8 = 12326 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 9 = 12341 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 10 = 12355 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 11 = 12370 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 12 = 12384 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 13 = 12399 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 14 = 12414 L / 20.000 MS/s / DVBS QPSK / FEC 7/8
TP 15 = 12428 R / 20.000 MS/s / DVBS QPSK / FEC 7/8
TP 16 = 12443 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 17 = 12457 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 18 = 12472 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 19 = 12486 R / 20.000 MS/s / DVBS QPSK / FEC 7/8
TP 20 = 12501 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
TP 21 = 12516 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3

[Anubis]

http://www.lyngsat.com/

[edrik]

a quick check on 110 shows lyngsat at 5 tps as turbo and our list at 31.
I therefore have no reason to believe that lyngsat was not obsolete data.
hence the wording in my previous post.
Sathint also appears to be wrong.