zombola
01-18-2016, 01:00 PM
Nfps/Rocket Password/Username Required 1 Feburary 2016Starting on Feburary 1 Nfps/Rocket are going to require a Username/Password for the Mag and AVOV boxes. To do this in the AVOV you will need to go to the server section and choose the active server and click on Credentials. This will allow you to enter your Username and Password. The username and password is the same username/password that you use for your IKS account. The Mag will have a similar way to add this. Although I have the Mag, it has been deactivated and I use both the AVOV and the M8S, so I do not remember the exact way. Someone using a Mag, please chime in!
c/p.....
MAG and AVOV - Password/Username Authentication - Tutorial
This tutorial is based on previous experience with Username/Password Authentication on a MAG 254 / AVOV VIXO 1 / TVOnline+ units
For MAG units:
When your Username/Password Authentication is implemented I suggest rebooting your device.
If IPTV66 is your only Portal, your device will automatically boot into the IPTV66 Portal. If you have multiple portals select the IPTV66 portal, and it will load.
You will now see the Authentication Bar load up in the background, but you will now be prompted to enter your Username (Donation #), once you enter that hit OK.
You will now be prompted to enter your Password (Donation #), once again you will have to hit OK. In some cases it will look like you have entered your Password incorrectly with a red "X".
This is ok, all you have to do it reset your MAG device at this point, and reload the portal. The Authentication Bar will pop up on the screen and will load like normal into the IPTV66 portal. You should only be prompted to enter your Username/Password (Donation #) once per MAC change. If you are prompted for your Username/Password more than once it is likely you have entered the incorrect information.
A reboot is recommended after Authentication details have been entered in correctly.
--------------------------------------------------
AVOV units:
If you already have the IPTV66 server information in your device, go to the settings area where you enter all your Portal information to log into IPTV66 servers.
At this point all you will have to do is edit your current information and hit the "Credentials" field and this will give you access to enter your Username/Password (Donation #). Save your information and reboot your device. It should connect without issue at this point.
As for specific details on AVOV TVonline V2 / AVOV TVonline+ / AVOV VIXO 1 / AVOV VIXO 2 I would suggest looking in the AVOV section on the forums for further assistance. The above information is the general guide to adding Username/Password Authentication to those units.
c/p.....
MAG and AVOV - Password/Username Authentication - Tutorial
This tutorial is based on previous experience with Username/Password Authentication on a MAG 254 / AVOV VIXO 1 / TVOnline+ units
For MAG units:
When your Username/Password Authentication is implemented I suggest rebooting your device.
If IPTV66 is your only Portal, your device will automatically boot into the IPTV66 Portal. If you have multiple portals select the IPTV66 portal, and it will load.
You will now see the Authentication Bar load up in the background, but you will now be prompted to enter your Username (Donation #), once you enter that hit OK.
You will now be prompted to enter your Password (Donation #), once again you will have to hit OK. In some cases it will look like you have entered your Password incorrectly with a red "X".
This is ok, all you have to do it reset your MAG device at this point, and reload the portal. The Authentication Bar will pop up on the screen and will load like normal into the IPTV66 portal. You should only be prompted to enter your Username/Password (Donation #) once per MAC change. If you are prompted for your Username/Password more than once it is likely you have entered the incorrect information.
A reboot is recommended after Authentication details have been entered in correctly.
--------------------------------------------------
AVOV units:
If you already have the IPTV66 server information in your device, go to the settings area where you enter all your Portal information to log into IPTV66 servers.
At this point all you will have to do is edit your current information and hit the "Credentials" field and this will give you access to enter your Username/Password (Donation #). Save your information and reboot your device. It should connect without issue at this point.
As for specific details on AVOV TVonline V2 / AVOV TVonline+ / AVOV VIXO 1 / AVOV VIXO 2 I would suggest looking in the AVOV section on the forums for further assistance. The above information is the general guide to adding Username/Password Authentication to those units.