what data cable do i use

[fred1438]

i not sure which cable to use the one that worked on nfusion or the one that worked on coolsat i know there not the same??
i try save user data base messed up,now shows ON few sec then STRT few sec then 0000 skips right to ON and starts over?
linkbox 8000hd local

[Anubis]

What happens if you turn unit off then unplug sat cable and leave it unplugged and boot up the box?

I believe you need a straight through cable.

[fred1438]

unplugged everything still the same,so that would be the coolsat cable??

[Anubis]

Do not know but it will probably say somewhere in the coolsat section. Look for a boot loop thread.

[nobodyspecial]

unplugged everything still the same,so that would be the coolsat cable??

just to confirm you unplugged sat cable and turned on?

[riverman]

use the nfusion cable (Null). Very few receivers use the Coolsat cable (straight thru). Load the factory file and start again

[fred1438]

unplugged everything,just rec all by its self no nothing.

[Anubis]

use the nfusion cable (Null). Very few receivers use the Coolsat cable (straight thru). Load the factory file and start again
Most if not all of the newer boxes use a straight thru cable.

[riverman]

I just upgraded my Linkboxhd Plus to the v211 file using a Null Modem Cable. Anubis I respectfully suggest you have your info backwards.