Need help with 119 sat

[Foxpac_40]

These are the setting that o have for 119 and i can seem to get any singal or quality can some one help me get it working for my ppv channels today

[Terryl]

Good photo, but we need a bit more info on your setup.

What type of LNB(s) do you have on the dish?

If they are Dish Pro (Large DP on them) then your LNB type needs to be set to what ever works for that type of LNB, on most receivers it's OCS-DP, or Dish, and the transponder needs to be changed to 12414, as 12239 is a spot beam and may not be for your location.

[hutch]

try a TP that is not a spot beam

[Foxpac_40]

I just changed it to 12414 and put it ocs-dp and nothing

[hutch]

is your LNB a Dish Pro? These Jynx overheat... do you use a lap top fan?

[drums]

is 119 on port 2?

[Foxpac_40]

No i dont use a laptop fan

[hutch]

12414 should be set at Qpsk just as the the 21500 SR TPs should be set to Turbo/8psk

[Foxpac_40]

Did that already andi get nothing the i havesome people say bypass but dont understand what that means

[hutch]

it means a switch may be bad so run your RG6 cable direct to the Jynx...if you are only running 119 then check your cable... connections LNB & that the satdish is pointed correctly