PDA

View Full Version : Kenmore dryer died.



link07
03-27-2010, 11:21 PM
i have a kenmore special edition dryer that does want to start. had it
for years then yesterday just clunked out. the dryer was still drying loads
perfectly and cleaned twice a year. any ideas? thanks link07

anyonomus
03-28-2010, 12:31 AM
i have a kenmore special edition dryer that does want to start. had it
for years then yesterday just clunked out. the dryer was still drying loads
perfectly and cleaned twice a year. any ideas? thanks link07

OK..From your post I can assume the motor is "not" running?
Or is the motor "running" and the drum not turning?
Or is the motor turning and the drum turning and you have no heat?
Cheers
any

link07
03-28-2010, 01:36 PM
No motor running, no drum turning, no heat. just dead. :tehe:
when push botton to start nothing.:noidea: I have no idea of ins and outs
of dryer components or how they operate.

cruzn
03-28-2010, 01:58 PM
... you probably have a broken drive belt...if the belt breaks ,nothing will work

eyeQ
03-28-2010, 02:08 PM
Check the electric outlet if it has power. Will replace the starter switch located at the door.

yaman
04-10-2010, 11:20 PM
If you are electrically incline and not a handy man, do not attempt anything. Get someone who know or buy a new one.

knob
04-15-2010, 08:43 PM
It could be as simple as a broken belt or burnt thermal fuse....how to get into different models of kenmore dryers depends on where the lint filter is located....

Pollypurabred
04-16-2010, 12:16 AM
Could be also something as simple as the door interlock switch. Open the door and "jogged" the switch/push button while trying to start dryer.

ob111
08-08-2010, 08:06 PM
... you probably have a broken drive belt...if the belt breaks ,nothing will work

the motor would still run with a broken belt.
check
1. main power
2. door switch
3. start button
4. thermal overload

and take yamans advice if you are not well versed in electrical have someone that is look at it for you
dead people can't dry clothes;)

dishuser
10-15-2010, 02:46 PM
see ya spammer...lol