No Signal !!!

[firpo]

Is it just me or is everyone else down to, I am not getting any signal on the T.V. I am thinking its the Switch or water could have got into it some how, a lot of rain came down the last couple days but i think i taped it, In the setting when i check there the signal and quality keeps jumping up to 20% but 118 is locked on 97% btw I got NFPS I am not getting anything 119 and 129 all the channels were up for a bit but all gone. Now not even the Indian Channels. So i need one of the masters to speak

[pgjeepster]

No signal is a your end issue, such as poor aiming, weather,something in the way of your dish, switch as you mentioned, cable or lnb you will need to eliminate the potential issues one at a time. Try a signal finder to re-align your sats for a start. There are many ways to eliminate component issues such as running your cable direct from the lnb to your box.

[firpo]

how do i line up 129 very hard for me. i am looking to find the how to align my dish i have a coolsat 5000 i have used 4ever. can someone plz give me a link to read plz and ty

[Condor]

how do i line up 129 very hard for me. i am looking to find the how to align my dish i have a coolsat 5000 i have used 4ever. can someone plz give me a link to read plz and ty

It's not easy if you are not too familiar... But the Coolsat is a great tool to use to align saucer... I really don't have an easy way for u unless you use a alignment tool.....

[firpo]

well i changed the lnb and the coax from the dish to the union i am still not getting 119 it maybe the settings

[nobodyspecial]

you need to run 119 directlty to stb and check it
The coolsat is not capable of picking up any of the conus tps on 129 as they are now all mpeg4
You can check to see if you aRE IN Any of the spot beams that are still qpsk

http://uplink.jameslong.name/chan129.html

[firpo]

i think i am gonna give up on the sat stuff i use npfs but its always down it seems
i have it wired direct without a switch but i am still only getting 118 no 119 still

[nobodyspecial]

i think i am gonna give up on the sat stuff i use npfs but its always down it seems
i have it wired direct without a switch but i am still only getting 118 no 119 still

what type of lnb are you using ,the combo lnb for 118/119? Post your settings

[firpo]

Anik F3 118.8W
DiSEqC 1.0: none
DiSEqC 1.1: None
TP Frequency: 11715 20000 V
LNB: 10750
22Khz Tone: OFF
Multi-Dish Switch: OFF
Search Options: All Channels
LNB Power: ON

Echo 7 119W
DiSEqC 1.0: none
DiSEqC 1.1: None
TP Frequency: 12297 20000 H
LNB: 10750
22Khz Tone: OFF
Multi-Dish Switch: OFF
Search Options: All Channels
LNB Power: ON

ya its the lnd combo for 118/119 its direct without a switch right now and sorry for the delay. i am thinking the hd module its burnt out. Am i suppose to be running 2 coax cable from the lnb? it could be he gave me the wrong lnb

[nobodyspecial]

my dreamlink dish settings dont have info like that Its like this

satellite
lnb power
lnb type
lnb freq
22
diseq 1
diseq 1.1
legacy

Also what file do you have on it?

[firpo]

satellite: 119
lnb power: on
lnb type: single
lnb freq: 12.297
lnb 22khz: off
diseq 1.0: off
diseq 1.1: off
legacy sw: off

the 118 have the exact same setting but lnb frq is 10.750 and i am getting 97%. but on 119 im not getting anything. in system info

Model Dreamlink T5
Loader Version: L 1.00.00
Harware Version: HT_V20 1.00.00
Application Version: Ver 1.02.00
Build Date: Oct 28 2013

[nobodyspecial]

In system info does it say 8psk after dreamlink t5?
If not you need to install a hd board a dl 100 or dl 200

You will also need to load this file with the updated tp information
http://www.satfix.to/showthread.php?191897-Dreamlink_T5_0106_0217P-bin

[firpo]

In system info does it say 8psk after dreamlink t5 no it doesn't say that
If not you need to install a hd board a dl 100 or dl 200

i have 1 in there hd module

i just installed that file you showed me still nothing

[nobodyspecial]

so it says 8psk insystem info?

did you factory set,do your settings and rescan?

[firpo]

no it doesnt say 8psk yes i did a factory


so it says 8psk insystem info?

did you factory set,do your settings and rescan?

[KIDWCKED]

no it doesnt say 8psk yes i did a factory


you will need a hd module...

[nobodyspecial]

no it doesnt say 8psk yes i did a factory

if it doesnt say 8psk then either its not installed,gone bad or not installed properly

[KIDWCKED]

here is the inside...the hd module has the black heat sink on top of it..

http://i1015.photobucket.com/albums/af275/toddr1/dlt5heat_zps3a92f744.jpg

[firpo]

i have it installed just the way the pic says but i got a feeling its not done properly at least now i no how to check


if it doesnt say 8psk then either its not installed,gone bad or not installed properly

[firpo]

For somebody that's nobodyspecial i find ya special and thank you for all the help. I am still working on it and i think i got the problem narrowed down to the HD module. i want to know if i take it out wouldn't i still be able to get 119/118.8? i am able to get 119 and 118 but when i scan for 119 only the 4digit channels show up in the scan?

[nobodyspecial]

For somebody that's nobodyspecial i find ya special and thank you for all the help. I am still working on it and i think i got the problem narrowed down to the HD module. i want to know if i take it out wouldn't i still be able to get 119/118.8? i am able to get 119 and 118 but when i scan for 119 only the 4digit channels show up in the scan?

119 requires the module

[Glatt]

Lnb frequency is same as 118 , 10750