difunto252
03-28-2010, 11:49 AM
Se trata de un trabajo archivos guardados desde un NaNO2 de trabajo a partir de 2010.03.27
El archivo es para NPN SATS 91/110/119W, tiene el Canal / Repetidor archivos incluidos, y ha sido "Blind escaneados" de cada satélite.
Anote la configuración de NaNO2 Antes de cargar este archivo. (Menú - conmutador DiSEqC, y Menú - Búsqueda de canales)
Si estás teniendo problemas con su NaNO2, descomprima el archivo, poner el archivo CER en una unidad USB, insertarlo en su NaNO2, con la NaNO2 remoto, seleccione - Menú - Utilidad - USB - luz de alta este archivo (NPN_0327062309.NPN) y em "LISTA" OK ". Permitir que el archivo a subir y el NaNO2 para reiniciar.
La configuración de antena es para un "Twin LNB DishPro", Diseqc1 = 119, Diseqc2 = 110, Diseqc3 = 91
Todos "Autorolls" & "UEM" = OFF
Si es necesario, cambie la configuración de plato a plato de su escrito de configuración NaNO2 (Menú - conmutador DiSEqC, y Menú - Búsqueda de canales).
Incluido en el fichero ZIP es el TP / Canal archivo STB_DATA_0327062257.STB. Este archivo tiene el PT y Canales de archivo para 91/110/119, que se deriva de una búsqueda ciega realizadas en 2010/03/27. Si su NaNO2 está funcionando muy bien, apenas cargar este archivo para actualizar su TP / lista de canales.
Copie el archivo STB_DATA en una unidad USB, insertarlo en su NaNO2, con la NaNO2 remoto, seleccione - Menú - Utilidad - USB - luz de alta este archivo (STB_DATA_0327062257.STB) y pulse "LISTA" OK ". Permitir que el archivo a subir y el NaNO2 para reiniciar.
================================================== ===================
This is a working files saved from a working Nano2 as of 2010.03.27
The NPN file is for sats 91/110/119W, has the Channel/Transponder files included, and has been "Blind Scaned" for each satellite.
Write down your Nano2 settings BEFORE LOADING this file. (Menu - Diseqc switch, and Menu - Channel Search)
If you are having problems with your Nano2, unzip the file, put The NPN file on a USB thumb drive, insert it into your Nano2, with the Nano2 remote select - Menu - Utility - USB - high light this file (NPN_0327062309.NPN) and push "LIST OK". Allow the file to upload and the Nano2 to reboot.
The dish antenna setup is for a "Twin DishPro LNB", Diseqc1=119, Diseqc2=110, Diseqc3=91
All "Autorolls" & "EMU" = OFF
If necessary change the dish settings to your dish written down Nano2 setup (Menu - Diseqc switch, and Menu - Channel Search).
Included in the ZIP file is the Channel/TP file STB_DATA_0327062257.STB. This file has the TPs and Channels file for 91/110/119, that is derived from a blind scan performed on 2010/03/27. If your Nano2 is operating fine, just load this file to update your TP/Channel list.
Copy the STB_DATA file on a USB thumb drive, insert it into your Nano2, with the Nano2 remote select - Menu - Utility - USB - high light this file (STB_DATA_0327062257.STB) and push "LIST OK". Allow the file to upload and the Nano2 to reboot.
El archivo es para NPN SATS 91/110/119W, tiene el Canal / Repetidor archivos incluidos, y ha sido "Blind escaneados" de cada satélite.
Anote la configuración de NaNO2 Antes de cargar este archivo. (Menú - conmutador DiSEqC, y Menú - Búsqueda de canales)
Si estás teniendo problemas con su NaNO2, descomprima el archivo, poner el archivo CER en una unidad USB, insertarlo en su NaNO2, con la NaNO2 remoto, seleccione - Menú - Utilidad - USB - luz de alta este archivo (NPN_0327062309.NPN) y em "LISTA" OK ". Permitir que el archivo a subir y el NaNO2 para reiniciar.
La configuración de antena es para un "Twin LNB DishPro", Diseqc1 = 119, Diseqc2 = 110, Diseqc3 = 91
Todos "Autorolls" & "UEM" = OFF
Si es necesario, cambie la configuración de plato a plato de su escrito de configuración NaNO2 (Menú - conmutador DiSEqC, y Menú - Búsqueda de canales).
Incluido en el fichero ZIP es el TP / Canal archivo STB_DATA_0327062257.STB. Este archivo tiene el PT y Canales de archivo para 91/110/119, que se deriva de una búsqueda ciega realizadas en 2010/03/27. Si su NaNO2 está funcionando muy bien, apenas cargar este archivo para actualizar su TP / lista de canales.
Copie el archivo STB_DATA en una unidad USB, insertarlo en su NaNO2, con la NaNO2 remoto, seleccione - Menú - Utilidad - USB - luz de alta este archivo (STB_DATA_0327062257.STB) y pulse "LISTA" OK ". Permitir que el archivo a subir y el NaNO2 para reiniciar.
================================================== ===================
This is a working files saved from a working Nano2 as of 2010.03.27
The NPN file is for sats 91/110/119W, has the Channel/Transponder files included, and has been "Blind Scaned" for each satellite.
Write down your Nano2 settings BEFORE LOADING this file. (Menu - Diseqc switch, and Menu - Channel Search)
If you are having problems with your Nano2, unzip the file, put The NPN file on a USB thumb drive, insert it into your Nano2, with the Nano2 remote select - Menu - Utility - USB - high light this file (NPN_0327062309.NPN) and push "LIST OK". Allow the file to upload and the Nano2 to reboot.
The dish antenna setup is for a "Twin DishPro LNB", Diseqc1=119, Diseqc2=110, Diseqc3=91
All "Autorolls" & "EMU" = OFF
If necessary change the dish settings to your dish written down Nano2 setup (Menu - Diseqc switch, and Menu - Channel Search).
Included in the ZIP file is the Channel/TP file STB_DATA_0327062257.STB. This file has the TPs and Channels file for 91/110/119, that is derived from a blind scan performed on 2010/03/27. If your Nano2 is operating fine, just load this file to update your TP/Channel list.
Copy the STB_DATA file on a USB thumb drive, insert it into your Nano2, with the Nano2 remote select - Menu - Utility - USB - high light this file (STB_DATA_0327062257.STB) and push "LIST OK". Allow the file to upload and the Nano2 to reboot.