T4 with DL100 Installed missing channels

[xzotick]

I installed the DL100 and scanned channels, I was missing quite a few channels in the scan...Some of the ones
scanned in only give a black screen but dont go to scrambled..I tried doing the manual scan and deleting the transponders, but still missing a lot of channels. (about half of the 300's and all the XXX's) Right now I'm only connected to 110, 119 with a dish 500. I have the new 0113 bin loaded. BTW is there any HD content on 110,119 I can check out while I'm waiting on my Dpp44 switch for 129?

Thanks

[The Noof]

Velocity is on 110 I think, & it isn't scrambled.

[xzotick]

Velocity is on 110 I think, & it isn't scrambled.

Thats actually one of the ones I'm missing all together...I'm still working on the that part. seems like I'm missing more on 110.

[xzotick]

I think I may have solved my own problem..looks like the LNB may be starving for power. even with the correct transponder on 110 still says echo 119 in blue in upper right. only one frequency says 110. maybe STB is just not getting enough power to LNB to work the switch. Its about a 75 feet run of rg6 to DP twin. I should have my power inserter in a couple days, hopely this will help...

[nobodyspecial]

post your settings

[nobodyspecial]

when you go to system info does it say 8psk anywhere?

[xzotick]

post your settings


110
power on
OCS-DP
11250
DiSEqC SW 1.0 2
DiSEqC SW 1.1 off
Legacy off


119
power on
OCS-DP
11250
DiSEqC SW 1.0 1
DiSEqc SW 1.1 off
Legacy off

[nobodyspecial]

110
power on
OCS-DP
11250
DiSEqC SW 1.0 2
DiSEqC SW 1.1 off
Legacy off


119
power on
OCS-DP
11250
DiSEqC SW 1.0 1
DiSEqc SW 1.1 off
Legacy off
those settings arecorrect for a dishpro twin
Does it say DP on it in big black letters?

[xzotick]

those settings arecorrect for a dishpro twin
Does it say DP on it in big black letters?

Yes it does...It's the dual without the extra feed for 129...It's the same one I used with my CNX nano before the change over to MPEG4. I have a DPP44 with power inserter on the way and I already have a dish for 129. I'm thinking maybe the T4 cant power the switch one the twin on a 75 foot run, sometimes channels stay black sometimes works.

[nobodyspecial]

Yes it does...It's the dual without the extra feed for 129...It's the same one I used with my CNX nano before the change over to MPEG4. I have a DPP44 with power inserter on the way and I already have a dish for 129. I'm thinking maybe the T4 cant power the switch one the twin on a 75 foot run, sometimes channels stay black sometimes works.

it must be the length of cable because it will run a twin on its own

[xzotick]

it must be the length of cable because it will run a twin on its own


I did notice also, the channels that are working are taking a long time to change...stays black for a second then comes in.

[xzotick]

I was able to resolve this myself. I shortened the cable run to 50 feet and its running 110,119 on a twin fine...My old CNX nano2 was able to handle the longer run but not the T4. But its working now...Thanks for the replys