No more signal :(

[pixim]

Hello,

Since the Ultimate server goes down on the beginning of the week, my Jynxbox is not able to have sat signal. I've reset the unit, put all setting exactly like before, nothing to do.... I'm running a Jynxbox Ultra HD v30 on DishPro Plus AK72-BTE LNBF

I'm lost :( Any idea ?

25920

[fn59]

On a DP lnb 91 is port 1, 82 port 2.

[pixim]

On a DP lnb 91 is port 1, 82 port 2.

Did you see my image?

lnb 91 is port 1, 82 port 2... Nothing change.... But no signal...

[pixim]

The only way I can get signal is after a factory reset, is by selecting the 91 without changing any option... If I do only one change, I loose the signal until I do a factory reset...
25921

Can anybody help my to get both of 82 & 91 ?

Why my old setting do not work anymore?

[pixim]

Anybody can help?

[bobby]

if you are getting signal on 91w at all times and nothing on 82w than the 8psk module is most likely faulty, either way it could be a bad module, do you have another module to test with? you could try connecting the 82w lnb direct to receiver with no switch(s) in the equation and see if signal is good and scan if possible, if you try this remember to turn off or un-plug receiver before disconnecting/reconnecting cable