82 scan issue. HELp me

[Maximum]

I've set up a few of these over the years and have never had this issue. Or at least where I couldn't resolve it without posting for help....

So i've tried it at my buddies place and mine with identical setups. Bev dish with two single LNB's running to a diseq switch and one single RG6 to the box.

Funny thing is I scanned 82 in the past at his house with nothing changed and now it doesn't seem to work.

He was on a server before and everything was ok. Now on the new server the scanned channels on 82 won't work and this where the issue came up was wit the rescan. SO I tried it at my place as well and no dice.

diseq setting set to 2 and lnb single. The signal sometimes comes in at 97 Q97 but then it stops when I scan it stops at tp 16 grabs a few odd channels and thats it..

Confused... any input...

[nobodyspecial]

are the hd chnnels scanning in?

[Maximum]

No there not at all. Just a few odd South Asian channels

[nobodyspecial]

try re-seating the module

[Maximum]

Ok I'll did that tomorrow. Thanks for your replys.

[nobodyspecial]

Ok I'll did that tomorrow. Thanks for your replys.

you might need a new board.
does it say 8psk after t5 in system info?

[Maximum]

you might need a new board.
does it say 8psk after t5 in system info?

Yeah I may. When you say board do you mean module. I'll be picking up a T5 and may swap moduled to see if thats what it needs.

CUrious nobodyspecial is dreamlink still one of the better boxes to go with...

[nobodyspecial]

good unit IMO

[auggie]

I've set up a few of these over the years and have never had this issue. Or at least where I couldn't resolve it without posting for help....

So i've tried it at my buddies place and mine with identical setups. Bev dish with two single LNB's running to a diseq switch and one single RG6 to the box.



Funny thing is I scanned 82 in the past at his house with nothing changed and now it doesn't seem to work.

He was on a server before and everything was ok. Now on the new server the scanned channels on 82 won't work and this where the issue came up was wit the rescan. SO I tried it at my place as well and no dice.

diseq setting set to 2 and lnb single. The signal sometimes comes in at 97 Q97 but then it stops when I scan it stops at tp 16 grabs a few odd channels and thats it..

Confused... any input...

Try scanning "without" the Diseq Switch, hook straight up/through. see if it changes anything channel wise

[Maximum]

Try scanning "without" the Diseq Switch, hook straight up/through. see if it changes anything channel wise

Yes usually do this to get a clean scan. Turns out I had bad module.


good unit IMO

Thanks for the help nobody it was a bad module.

[palermoan]

Can you plz pm me thank you...

[tiranablu]

hi guys. can you give me a link to any guy which i can give a donation for beverly? i've been away for a few months and the previous guy doesnt reply my emails . thank you in advance