dreamlink t5 no channels scanning anymore need help.

[porkazil]

kinda confused here.
i have a t5 dreamlink, with latest file.
only frequency i get is 12253 and scans channels.
i don't get anything else.
anyone know what has happened.

i have been trying to find a new sat file to load onto receiver with the latested frequencies and tp's but can't find anywhere.

any help, be fight this for 2 months now.

thanks in advance.

pzil

[nobodyspecial]

Latest file has updated tps in it

[rooster_911ca]

Try going to manual scan and make sure network scan is on.

[porkazil]

my issue is i get Bad or No Signal for every other frequency only one that works is 12253 and i get 99% quality, rest is 0%

[nobodyspecial]

Post your hardware
Also post your system info in menu

[Terryl]

Yes I agree, post your type(s) of LNB(s) your using, any switches, and what satellites you looking at, this will help us greatly in trying to help you.

Also any settings your using for the satellites your trying to receive, if you have re-loaded any software to the box it may have been re-set to factory default, this could cause all sorts of problems.

[skatz420]

Check the voltage settings in the installation menu. Maybe it got switched to one polarity.