Laptop fan

[hshafiee]

I was wondering anybody tried to plug in laptop fan with USB connector to T5 where you normally plug a jump drive?
This way whenever you switch on T5 fan should start too.

[hshafiee]

Ok. I tried this myself and yes it worked. You can plug a laptop fan to T5 where you plug the usb jump drive.

[County]

yeh it works great

[bcbud]

I use a laptop fan on mine and the whole receiver
stays cool

[Terryl]

Any of the standard laptop coolers will work as long as they don't exceed the 500 mA USB port DC power output rating.

If you have a jump drive installed on that port then look for one with a pass through USB connector, and again be sure the total DC current required does not exceed the ports output.

if so then you can get a DC wall wart with a USB connector on it to run the cooler.

[fishmaster]

I just use a Power-Bar w/ USB- input on the power-bar put it beside the receiver/cooling fan and viola!- Good to go!

[hshafiee]

Thanks Terry my fan doesn't exceed 0.5 AMP.