anyone know

[extreme]

anyone know the code to get a ivisionsat remote to work a ilink 9000 plus reciever

[jvvh5897]

No, but looking around I found a little info at the JP1 programmable remote site:

http://www.hifi-remote.com/forums/viewtopic.php?t=14747&postdays=0&postorder=asc&&start=0
They say the box may respond to a number of NEC1 protocol remotes including Pansat's old 2800 one. As I recall Pansat boxes supported 3 remotes and the NEC1 protocol is a common one, so maybe if you cycle through a universal's remote supported codes you might find one that gives you some functions on some buttons.

[jvvh5897]

Oh, BTW, like the KBox files, the I-link 9000 plus files are compressed with something like lzss but I'm not sure what you need to do to get clear code from them. The start of the img file has info on the location in the file that chunks start at, how many bytes you get if you could in-pack them, where to put the un-packed bytes in RAM and whether compression is used or not (each entry is 4 bytes and 0x0 indicates no compression while 0x1 is used if there is compression).

What I would likely do, is set up a PC to output IR signals and run through trying to find what code I needed for a given function--I would likely start by outputting the set of NEC custom codes that Pansat used.

Course, the harmony remotes would likely work too.

[c8rbk1ng]

anyone know the code to get a ivisionsat remote to work a ilink 9000 plus reciever

Don't you have the receiver's users guide? Look for either ones user guide and see if there are codes listed there.