View Full Version : lost 110
thehads
07-29-2017, 12:16 AM
about a week ago I lost signal on 110 I get 95- 98 percent but red in most channels ive changed the lnb and all wires to it and tried different switch and replaced the dl chip and still cant get a signal did dish change the transponders again that I have to change settings
Is 110 the only sat you are aimed at?
thehads
07-29-2017, 12:44 AM
no I have 119 82 and 91 and there all fine and some 110 channels in the 300s locks blue but the channels still don't come in
There was an ecm recently. In the general receiver forum there is a transponder list which has all the correct info Check to make sure yours are correct.
jvvh5897
07-29-2017, 07:44 PM
AFAIK, all the TP changes on 110 and 119 have been made and have been static for some time now. I don't think they are going to change local spot beams from QPSK to Turbo FEC 8PSK. You might see some changes to Bell satellites in the future. And one can always expect that the provs are going to do their best to stop piracy--ecms, encryption method updates are the norm.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.