no signal, Is there an update bin files for that?

[chineselover]

Suddenly, there is no signal on all the satellite, is there a new bin file for this problem? or is there something with my machine...

[nobodyspecial]

no signal is a hardware issue There can be many reasons
dish moved,switch failed,lnb failed,hd board failed etc

[johnnylarue]

Suddenly, there is no signal on all the satellite, is there a new bin file for this problem? or is there something with my machine...

Check your hardware and switch, etc... If it is not that, try the SysCleanFile. I had the no signal problem a few times back in the day, and that file worked. It is in the file section.

[nevernamed]

THIS THREAD WAS SUPER HANDY TODAY!! I've been trying to figure out a no signal problem I had since I swapped switches the other day.. cut back my lines, put new connectors. nothing. new swithc nothing. straight line to the receiver would work though. bought another new switch thinking the spare was a dud. nothing.. then i found this. used the sysclean bin.. and right away i'm finding signals on all my satellites again after finding ZERO for days..

THANK YOU!

now i just need to find the cracked akai japan hd20 bin, since the 514 bin doesn't work with my svlan

[The Noof]

THIS THREAD WAS SUPER HANDY TODAY!! I've been trying to figure out a no signal problem I had since I swapped switches the other day.. cut back my lines, put new connectors. nothing. new swithc nothing. straight line to the receiver would work though. bought another new switch thinking the spare was a dud. nothing.. then i found this. used the sysclean bin.. and right away i'm finding signals on all my satellites again after finding ZERO for days..

THANK YOU!

now i just need to find the cracked akai japan hd20 bin, since the 514 bin doesn't work with my svlan

Hd2028 or HD no-check will work fine.You will have to update the transponder data as well.

[nevernamed]

Unfortunately my problems are not resolved. I'm starting to think my 8psk is taking a dump on me.. Its infrequently working. If I leave things running when it works, it stays working. If I power off the power supply to the receiver, it starts not seeing signal again.

Then my sonicview started rebooting itself, and it did it during a flash. its now a dead hunk of crap.

[The Noof]

Unfortunately my problems are not resolved. I'm starting to think my 8psk is taking a dump on me.. Its infrequently working. If I leave things running when it works, it stays working. If I power off the power supply to the receiver, it starts not seeing signal again.

Then my sonicview started rebooting itself, and it did it during a flash. its now a dead hunk of crap.

Look carefully at the power supply module:see any bulging capacitors?