scan 110, 119

[bill77]

I can't scan these sats.

I've got 91,110 and 119 on ports 1, 2 and 3 but can only lock to Nimiq.
Normally I just go with LNB freq, 11250 and set DiSEq1.0 to ports to 2 or 3 but that's not working.
When I go to search, it shows Tuner as LNB1 and locked to 91.0 W even though I haven't even selected it.

When I first got my 9000i I got DN scans so I must've messed something up.
Does anyone know what's happening and how to fix it?

[nobodyspecial]

settings correct?
If using 3 single lnbs and a diseq its probably the switch You can test each lnb by hooking directly to box Use a barrel connector if needed Dont forget to power off box in back when hooking up switch

[harry3456]

I don't remember, but I don't think 110/119 will show a lock. If you think your settings are correct go ahead and scan. Post back the results. If didn't scan correctly give as much info as possible. Dish, LNB, switches and full settings on each satellite set up page.

[bill77]

Took it to the dealer and it turned out to be the box and not the switch.

Since it's new and under warranty, I thought I'd be covered,
but the dealer told me it'd cost me a bundle for mailing it to California and back.

Really? Anyone have any experience with this who can fill me in?