PDA

View Full Version : mag250 wrong image



kuzyn
09-15-2018, 04:31 AM
Hello guys, maybe someone had simular situation and can help. Anyway, just got brand new mag250, hooked up and everything looked okay until I've decided to change resolution which caused blank screen and mode not supported message. Went to bios and tried to upload firmware file but wouldn't let either giving me a message wrong image. Tried def. settings in bios and won't let me either. Current Ver. Hardware is 1.14-BD-00.
Any help will be greatly appreciated !

dishuser
09-15-2018, 04:59 AM
C/P
Credit M.Crash


PART1 - DOWNLOAD SOFTWARE
1) Download and extract from HTML Code:

HTML Code:
http://soft.infomir.com.ua
Bootstrap_254.clean (RENAME as Bootstrap)
imageupdate
3) Place the both files (imageupdate and Bootstrap) into a folder called mag254 on your USB stick

PART2 WIPE THE BOX
PLUG IN POWER SUPPLY
HOLD MENU BUTTON

Enter The BIOS.
choose “Def. Settings”.
press the right.
IGNORE MESSAGE ´WRONG IMAGE´
confirm by pressing the “OK”.
Select “Exit & Save” to save and exit.
STB will reboot automatically.
message ´Tftp load ´ will be on screen
power lead out

PART 3 - FLASH THE BOX
1) Plug the USB Stick in the REAR USB Port
2) Power the STB on - press and hold the MENU button (just above the volume up button - you have to be quick)
3) Go to Upgrade Tools, then USB bootstrap.

This will then flash the STB with all your portal settings

dishuser
09-15-2018, 05:00 AM
then sell your crap to some sucker and buy a real box

Dodgem
09-15-2018, 12:38 PM
You can try this....

If there is no image then complete next steps:
Unplug power of STB
Press and hold “Menu” button on RC (direct your RC to STB)
Plug power on STB with holding “Menu” button
Hold “Menu” button during 10 seconds.
Switch PAL – NTSC with asingle press on the red “F1” button.

kuzyn
09-15-2018, 11:46 PM
Not sure if I did something wrong but I don't see my posts. Anyway big thank you to Dodgem and dishuser. I've tried Dodgem suggestion and still getting "mode not supported". Than I've tried dishuser's. Got to the last part of your instructions and keep getting message "file imageupdate not present" even though I got from the source you told me. What do you guys think, is it the file or the box ? And yes dishuser, you are right looks like I became the sucker by buying that box ! Lol Any suggestio which box would be much better than this one ?

dishuser
09-15-2018, 11:56 PM
Not sure if I did something wrong but I don't see my posts. Anyway big thank you to Dodgem and dishuser. I've tried Dodgem suggestion and still getting "mode not supported". Than I've tried dishuser's. Got to the last part of your instructions and keep getting message "file imageupdate not present" even though I got from the source you told me. What do you guys think, is it the file or the box ? And yes dishuser, you are right looks like I became the sucker by buying that box ! Lol Any suggestio which box would be much better than this one ?
if you bought the box years ago you got your money's worth
mag is the like the dodo bird
get an android box

kuzyn
09-16-2018, 12:17 AM
Actually I got it not long time ago but may go with your advice and replace it with something more new.
Thank you again for your help