View Full Version : T5 only CNN Channel not scanning on sat 82
bbatur
10-19-2018, 09:56 PM
All transponders have good signal and quality everything scans fine but I can not get cnn is that channel moved from 82 lynsat maybe not updated.
Transponder 12399 v scans good signal and quality but no cnn comes in any help would be appreciated
nobodyspecial
10-19-2018, 11:05 PM
All transponders have good signal and quality everything scans fine but I can not get cnn is that channel moved from 82 lynsat maybe not updated.
Transponder 12399 v scans good signal and quality but no cnn comes in any help would be appreciated
you are doing a manual scan?
bbatur
10-20-2018, 12:51 AM
yes I am still the same I don't know what else to try
Curler89
10-20-2018, 06:34 PM
CNN is on 119 at 12.443 (H) and 129 at 12.546 (V) if this helps.
bbatur
10-20-2018, 06:39 PM
like to know where is cnn on nimiq 4 sat 82 keep trying still no go
nobodyspecial
10-20-2018, 07:36 PM
like to know where is cnn on nimiq 4 sat 82 keep trying still no go
post your setup and settings
dishuser
10-20-2018, 09:10 PM
CNN is on 119 at 12.443 (H) and 129 at 12.546 (V) if this helps.
read thread title ;)
bbatur
10-21-2018, 12:02 AM
I got it I'm asking for sat 82 not 119 129 also 91 has it too .
countysat
10-21-2018, 03:25 AM
Try these settings. Channel 2578 on T5
27436
bbatur
10-21-2018, 02:19 PM
I tried still get 6 channels on that transponder but no cnn is there any way to insert that channel manually for some reason it does not scan that channel any ideas thanks everyone
nobodyspecial
10-21-2018, 02:54 PM
Still waiting for a reply to post 6
bbatur
10-21-2018, 03:34 PM
Sorry, 24 inch dish main set up 91 and 82 set up with the bracket next to the 91, lnb type singles 11250 for both chieta disceq switch
port 1 on 91 port 3 on 82.
signal and quality 87 on 82
nobodyspecial
10-21-2018, 03:42 PM
Sorry, 24 inch dish main set up 91 and 82 set up with the bracket next to the 91, lnb type singles 11250 for both chieta disceq switch
port 1 on 91 port 3 on 82.
signal and quality 87 on 82
Bypass your switch and run 82 directly to rcvr Dont forget to change settings to reflect this and to power off rcvr in back
bbatur
10-21-2018, 07:31 PM
problem was the lnb I don't still get it same lnb as 91 when I swaped 91 lnb with 82 it scanned cnn so looks like I'll return the lnb get another one
nobodyspecial
10-21-2018, 07:39 PM
problem was the lnb I don't still get it same lnb as 91 when I swaped 91 lnb with 82 it scanned cnn so looks like I'll return the lnb get another one
glad you found the issue
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.