titan69
02-21-2019, 09:06 PM
Ok, im writing this because It took me more than a few tries to get this right. So hopefully this will help someone that is
having trouble getting this correct.
Enter network settings, hit the blue button, it should now ask for a passcode. Enter 0000 (unless you changed it).
Now enter the server of your choice. (number 1,2,3 etc.)
Step 1
Server/ Ip
Next enter your server address or ip address that you were given. (double check that its correct) After you have entered it
correctly get closer to your box so you can see the light on the front of it. Now push the red button 3 times and you
should see the light on the front of your box flash (very lightly) each time you press the red button. Now click exit. Again click exit. Now your back at the server page. Hover over the server you just entered and push the right arrow over the server and did say (OFF) now it should say the ip or address of the info you just put in.
Step 2
PORT
We are going to skip this until last.
Step 3
Username
Type in the user name you were given. When done again push the red button 3X and watch the front of the dreamlink box to
verify that the light flashed for each button push. Now push exit.
Step 4
Password
Type in the password you were given. When done push the red button 3X and verify on the box that the light flashed 3X. Now
push exit.
Step 5
Deskey
Enter your deskey you were given, verify that it is correct. Push the red button again 3X and watch the box to make sure
the light flashed 3 times.
Step 6
Now go back up to the port setting, and enter your port number. When finished push the red button. It should now say saved.
So, now that all your info is in, click exit. It should now tell you that settings were changed and ask you to save again (click yes).
Do not go back into settings or anything like that, we are going to ignore the "connect" button.
Exit all the way out of your settings and back to your main screen. Now shut down the box. when the box is completely shut down, turn off the switch in the back for 3 seconds. Now power back on. to verify that your connected go to network
settings and you should see connection ok 1,2 (or whatever number you put it under).
having trouble getting this correct.
Enter network settings, hit the blue button, it should now ask for a passcode. Enter 0000 (unless you changed it).
Now enter the server of your choice. (number 1,2,3 etc.)
Step 1
Server/ Ip
Next enter your server address or ip address that you were given. (double check that its correct) After you have entered it
correctly get closer to your box so you can see the light on the front of it. Now push the red button 3 times and you
should see the light on the front of your box flash (very lightly) each time you press the red button. Now click exit. Again click exit. Now your back at the server page. Hover over the server you just entered and push the right arrow over the server and did say (OFF) now it should say the ip or address of the info you just put in.
Step 2
PORT
We are going to skip this until last.
Step 3
Username
Type in the user name you were given. When done again push the red button 3X and watch the front of the dreamlink box to
verify that the light flashed for each button push. Now push exit.
Step 4
Password
Type in the password you were given. When done push the red button 3X and verify on the box that the light flashed 3X. Now
push exit.
Step 5
Deskey
Enter your deskey you were given, verify that it is correct. Push the red button again 3X and watch the box to make sure
the light flashed 3 times.
Step 6
Now go back up to the port setting, and enter your port number. When finished push the red button. It should now say saved.
So, now that all your info is in, click exit. It should now tell you that settings were changed and ask you to save again (click yes).
Do not go back into settings or anything like that, we are going to ignore the "connect" button.
Exit all the way out of your settings and back to your main screen. Now shut down the box. when the box is completely shut down, turn off the switch in the back for 3 seconds. Now power back on. to verify that your connected go to network
settings and you should see connection ok 1,2 (or whatever number you put it under).