9182 service

[bluenose1]

Hi can someone tell me about my satellite , right now i am set for iks south but i can get a great signal on 82.0w nimiq 4 but i need 91 0w nimiq 6 my 91 signal is nimiq 1 so how do i get it to nimiq 6 which i need on my T5 thanks .

[wedalan]

Just short a detail or two...

Do you have line of site?
Are you under the sat footprint?
Tell us your dish size & type as well as lnb(s) and / or multi switch or disec

[bluenose1]

Not really sure about footprint and line i always had someone work on the dish but its so expensive for their service . I have a bell dish with the the DPP QUAD LNB i'm getting a 97 % signal on 82.4 and 91.1 and i need nimiq 6 on it thanks

[sat9182]

load this file to your box
https://www.satfix.to/attachment.php?attachmentid=27346&d=1533489947

its proper names for bev and then set your lnb settings in it
this will save you a lot of headache

[bluenose1]

Thanks will try when i get back later thanks

[nobodyspecial]

Hi can someone tell me about my satellite , right now i am set for iks south but i can get a great signal on 82.0w nimiq 4 but i need 91 0w nimiq 6 my 91 signal is nimiq 1 so how do i get it to nimiq 6 which i need on my T5 thanks .

Its good that the signal is great but it must be blue and the correct sat must appear at top right

[Letsreg]

Go to dishpointerdotcom. It will give you all the info you need to aim your dish at 91W (elevation, azimuth & skew) Use the map to pinpoint your house then use the sat drop down menu & scroll down to 91W

[wedalan]

Did you have the DPP Quad Lnb working with your T5?
If so carry on.

I thought the T5 didn’t have the power to run the Dpp lnb, maybe you have an inserter or another sat rec connected to feed the extra power.

As for footprint... if your in Canada your in. If your state side but close to can/us border or further south it becomes questionable.

As for aiming the dish let YouTube be your guiding hand. There are free telephone apps that get you in the ballpark also.
If you don’t have a sat finder then just have the wife help you out, Lol! Go straight to divorce court!


Good luck

[bluenose1]

the bell DPP quad lnb worked great with the dreamlink T5 course i'm in beautiful CANADA EH .

[bluenose1]

Morning i load the channels from the usb and i'm connected to the server i only have 82.0w nimiq 4 my 91 isn't set to nimiq 6 so i just scanned in the 82 satellite channels . The channels are from 1104 to 10696 and there all scrambled yet i am connected i think the 82 satellite should come in with a 97 % blue signal does anyone have an answer i been on this since friday thanks .

[guy]

your transponder settings set them[/I]

[bluenose1]

Thanks Guy yje only place i see transponder in all the settings is in manual scan TP is that it thanks

[Letsreg]

Bluenose- You have to aim your dish at 91W. See my post above (#7)

[bluenose1]

Understand that but i don't wanna spend a 100.00 to have my dish moved and not get anything. I'm getting 82 . nimq 4 with a 97 % signal in blue and all channels are scrambled if this 9182 works i should be getting something thanks .

[beefcake]

Makes sense if one satellile is receiveing 97 % signal i wouldn't spend a 100. to have the other satellite come in and receiver no channels working .

[surfinisfun]

Understand that but i don't wanna spend a 100.00 to have my dish moved and not get anything. I'm getting 82 . nimq 4 with a 97 % signal in blue and all channels are scrambled if this 9182 works i should be getting something thanks .

Have you checked and rechecked your info put in to connect to server?

You could ask your reseller to check your connection as well.

[pennywise]

you say you have blue signal, do you have the same on quality with a lock on the sat.

82 has unnecrpyted audio so if you were set up properly you would at least hear the audio then you could narrow it down to the server but if your not getting the audio your set up is incorrect

[bluenose1]

I'm connected to the server and he told me to load the channels from a thumb drive which i did and i have nothing thanks .

[nobodyspecial]

I'm connected to the server and he told me to load the channels from a thumb drive which i did and i have nothing thanks .

how do you know you are connected?
does it say connected with a number in brackets?

[bluenose1]

Thanks when i go into server setup and posted all my info. and hi ok its says server is connected thanks

[nobodyspecial]

Thanks when i go into server setup and posted all my info. and hi ok its says server is connected thanks

ok,but does it say connected with a number in brackets or just () before that?
Is your server slot turned on?

[surfinisfun]

I'm connected to the server and he told me to load the channels from a thumb drive which i did and i have nothing thanks .

Did you actually scan 82?

[nobodyspecial]

Did you actually scan 82?

he loaded a channel list

[bluenose1]

82 channels are loaded and scanned and noting thxs

[nobodyspecial]

can you answer post 21?

[bluenose1]

In the server settings on the T5 it just says connected to the server and theres no sever slot that in see in the settings thanks

[nobodyspecial]

when you go into where you input all your info the server slot you used must be on.You should see the ip or url name

Do you? If not highlight the server slot and use the left or right arrow on the remote to turn it on

[bluenose1]

When i click on server name it goes to off so i right click and it comes back on thanks

[surfinisfun]

When i click on server name it goes to off so i right click and it comes back on thanks

OMG!

Giving half answers is not going to help you. Do you see the server name/url when you turn that server slot on?

[bluenose1]

sorry there are 2 pages on the server setup the first page i see the server name but not on the second page with the port, user name and password sorry .

[pennywise]

just because you load a channel list doesn't make your satellite and settings correct. again, no audio on 82 then you have other problems prior to the server. Are you getting audio on any channel

[bluenose1]

Thanks i have no audio either i think i have to find someone in Niagara to give me a hand thanks .

[pennywise]

if you post your satellite type, lnb, type and any switches your using I'm sure you can get directed here. that's what people are here for

[dishuser]

Thanks i have no audio either i think i have to find someone in Niagara to give me a hand thanks .

did you even move your dish?
higher elevation plus turning it?
and skew?

[dishuser]

set skew to 90
elevation to around 40
and facing dish turn it to the right
I think that's what it is(been years)
elevation might need to be a little higher/lower depending if mast is plumb

[Putski]

you can use a pencil or marker to mark the settings on ur Dish
so you can make adjustments and get that bird ur missing,, also sounds like you are missing a few settings on ur box.

[ICEMAN]

Bluenose try to post both of your sat.settings here so we can get you going that would be a start....

[Letsreg]

Bluenose- if you're in Niagara Falls send me a PM

[bluenose1]

Morning everyone i am so sorry for not getting back it was so stressful changeing from iks south to 9182 north especially when you don't know what your doing.
ALL YOU guys have been amazeing and some things i couldn't answer but i sure know how to turn the tv on . It took me like almost 2 weeks to get 9182 up and running and seems to be ok but thanks guys for all your support THANK YOU.

[wedalan]

Lol!

First time 2 weeks

Next time 2 hrs....it has a learning curve.

Glad to hear your sorted out.