View Full Version : Dreamlink T2 and T2 prime with OK2 and OK3 issue
stu katz
04-05-2019, 03:24 AM
so a friend bought one of each of these on advice of a few people, myself included
both work absolutely fine with OK2, but he prefers OK3 for the way the channels are set up numerically
here's the thing....on OK3 with either the T2 and the T2 prime the channels are a dogs breakfast,
the channels are not in any order whatsoever, but scrambled all over the place
not sorted by numerical order or alphabetically or any other logical method ??
we have tried both boxes with a variety of other servers without any problem...just OK3
i thinking this is not a dreamlink problem but a OK3 issue??
is there a fix for this....?
dishuser
04-05-2019, 03:31 AM
so a friend bought one of each of these on advice of a few people, myself included
both work absolutely fine with OK2, but he prefers OK3 for the way the channels are set up numerically
here's the thing....on OK3 with either the T2 and the T2 prime the channels are a dogs breakfast,
the channels are not in any order whatsoever, but scrambled all over the place
not sorted by numerical order or alphabetically or any other logical method ??
we have tried both boxes with a variety of other servers without any problem...just OK3
i thinking this is not a dreamlink problem but a OK3 issue??
is there a fix for this....?
no issues with ok3 using a buzz,global or zoomtak with stbemu pro
stu katz
04-05-2019, 08:30 AM
thanks have tested those same boxes and you can add a mag 256 to that list as working with OK3
why would the T2 be so problematic with OK3 and not any other service...?
do you know if this is a recent issue First I have heard of it
got2bme
04-05-2019, 12:38 PM
Found this for D T1 so don't know about D T2 but you might want to try.
C&P
You may have noticed that with DOL 2 (DreamOnline) that channel numbers may appear as 1, 2, 3, 4 etc etc.
In order to fix this issue to have the channels match the proper channel list you need to do the following:
1. Press the Menu button on your remote.
2. Select Settings Menu (Live TV, VOD, Service, and Settings).
3. Press Up or Down on your remote until you have Group Channel Numbering menu selected.
4. Once you have Group Channel Numbering selected, press Left or Right on your remote to select OFF.
5. Press Exit on your remote. Your channels will now appear in order as provided by IPTV.
Found this for D T1 so don't know about D T2 but you might want to try.
C&P
You may have noticed that with DOL 2 (DreamOnline) that channel numbers may appear as 1, 2, 3, 4 etc etc.
In order to fix this issue to have the channels match the proper channel list you need to do the following:
1. Press the Menu button on your remote.
2. Select Settings Menu (Live TV, VOD, Service, and Settings).
3. Press Up or Down on your remote until you have Group Channel Numbering menu selected.
4. Once you have Group Channel Numbering selected, press Left or Right on your remote to select OFF.
5. Press Exit on your remote. Your channels will now appear in order as provided by IPTV.
Thank you ,did not think it was server
stu katz
04-05-2019, 01:29 PM
i was hoping that a senior member or moderator would have access to a T2 or T2 prime to verify the following
the box by default is on the "off" as recommended in the above post
here is some further info hoping to find a solution
two scenarios here with that same option as above with it in the "on" and "off" positions and in the "all" channels category
channels as seen in the "OFF" position
24.......CP24
8.........CTV HD
206.....Fox business
3........Global HD east
599.....Media set
same channels as seen in the "ON" position
207.......CP24
208.......CTV HD
209.......Fox business
210.......Global HD east
211.......Mediaset
hope this helps explain better....
thanks guys
dishuser
04-05-2019, 01:55 PM
i was hoping that a senior member or moderator would have access to a T2 or T2 prime to verify the following
the box by default is on the "off" as recommended in the above post
here is some further info hoping to find a solution
two scenarios here with that same option as above with it in the "on" and "off" positions and in the "all" channels category
channels as seen in the "OFF" position
24.......CP24
8.........CTV HD
206.....Fox business
3........Global HD east
599.....Media set
same channels as seen in the "ON" position
207.......CP24
208.......CTV HD
209.......Fox business
210.......Global HD east
211.......Mediaset
hope this helps explain better....
thanks guys
channels off is correct
dishuser
04-05-2019, 02:13 PM
did you set renumbering before turning off?
stu katz
04-05-2019, 02:22 PM
did you set renumbering before turning off?
yes he did
dishuser
04-05-2019, 02:32 PM
on my buzz I never use all
I use the category I want to view such as english or sports
stu katz
04-05-2019, 04:26 PM
on my buzz I never use all
I use the category I want to view such as english or sports
ok here is the results using the english category and with a hard reboot after every change
OFF position
24......CP24
8........CTV
206.....Fox Business
3........global east
4........omni 1
ON position
81......CP24
82.......CTV
83.......Fox Business
84.......global east
85........omni 1
same results all messed up.....
as i said before t2 and t2 prime no issues with OK2...i think this a OK3 issue
ok here is the results using the english category and with a hard reboot after every change
OFF position
24......CP24
8........CTV
206.....Fox Business
3........global east
4........omni 1
ON position
81......CP24
82.......CTV
83.......Fox Business
84.......global east
85........omni 1
same results all messed up.....
as i said before t2 and t2 prime no issues with OK2...i think this a OK3 issue
think what you want ,nothing different
stu katz
04-05-2019, 06:34 PM
well that wont fix the problem...lol
i can verify if its his box(s) and other dreamlinks later today
will also verify if they work with OK2 and not OK3...which i already expect
well that wont fix the problem...lol
i can verify if its his box(s) and other dreamlinks later today
will also verify if they work with OK2 and not OK3...which i already expect
If its not user error dreamlink has to do some work on their end
Its not the first time thay have had to fix some stb/server conflicts
harpdog
05-01-2019, 08:29 PM
I find this issue with all m3u files on the t2 no matter what server I use but not with api codes
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.