PDA

View Full Version : XPL 3900 Android 7.1 Stuck in Boot Fix


Bot1
07-19-2019, 06:03 PM
1. Download the file onto a computer
Then transfer it onto a USB drive or SD card
Then insert into box

2. Use reset button inside AV hole on the back of your 3900 to get into recovery mode on first time power up.
You will need to hold the Reset button on first time power until you get into Recovery Mode.

You will need to use a Tooth Pick or Paper Clip or something similar to do this.

3.
Once in recovery
Go to
Apply update from ext

Select Udisk which is the USB Drive or SD Card depending on which one you have the Firmware stored on

4.Highlight the Firmware
Press Ok to install it

It will take up to 8 mins to install

5. Once finished
Select reboot

6. It will boot back into Android and everything is normal and nothing is erased.


https://mega.nz/#!vUtgnIrJ!xD0px7qHy68TrZlxEv9yE47hZyexYVXPkjuhD5b n0fs
houndogz
07-19-2019, 11:37 PM
Will it work for the 3000 as well?
dishuser
07-19-2019, 11:45 PM
Will it work for the 3000 as well?

the update screwed up your 3000?
houndogz
07-19-2019, 11:46 PM
Yes. Stuck.
dishuser
07-19-2019, 11:47 PM
Yes. Stuck.

it will work but you're the only one I've seen that happen to
houndogz
07-19-2019, 11:48 PM
Buzztv XPL3000
houndogz
07-20-2019, 12:11 AM
Worked for the 3000XLP. Back up and running. Thanks.
kor123
07-20-2019, 05:31 AM
I just found these forums by random as I have a XPL 3900 - and was running into the boot loop issue. I downloaded the file and installed it and everything is working again. Thanks!
Putski
06-28-2020, 08:29 AM
used this file and it brought the 3000 basic back to life.. yay
after being bricked, from the arq100 remote update..
question is..
why can we get a file for the 3900 but not the Basic 3000
Why not?
Putski
06-28-2020, 08:34 AM
1. Download the file onto a computer
Then transfer it onto a USB drive or SD card
Then insert into box

2. Use reset button inside AV hole on the back of your 3900 to get into recovery mode on first time power up.
You will need to hold the Reset button on first time power until you get into Recovery Mode.

You will need to use a Tooth Pick or Paper Clip or something similar to do this.

3.
Once in recovery
Go to
Apply update from ext

Select Udisk which is the USB Drive or SD Card depending on which one you have the Firmware stored on

4.Highlight the Firmware
Press Ok to install it

It will take up to 8 mins to install

5. Once finished
Select reboot

6. It will boot back into Android and everything is normal and nothing is erased.


https://mega.nz/#!vUtgnIrJ!xD0px7qHy68TrZlxEv9yE47hZyexYVXPkjuhD5b n0fs


this fix does work.. Thank You!