View Full Version : Switching 9182
wilfredw
03-06-2020, 04:49 PM
Got my dream link hooked to a bell eliptical dish,how does one switch seamlessly between 91 and 82 ?
The Noof
03-06-2020, 05:03 PM
What lnb/switch combo?
wilfredw
03-06-2020, 07:22 PM
What lnb/switch combo?
No switch.Lnb,s are ones that came with dish.Too much snow on roof now to check.Was able to receive both sat at first,now only 91 wants to go.
nobodyspecial
03-06-2020, 09:05 PM
No switch.Lnb,s are ones that came with dish.Too much snow on roof now to check.Was able to receive both sat at first,now only 91 wants to go.
what are your switch settings?
wilfredw
03-06-2020, 09:56 PM
what are your switch settings?
Don,t have any, just ditched my bell sub and hooked up to my t5.
The Noof
03-06-2020, 10:05 PM
Then it must be a DishPro lnb?Do you seethe 82 sat in the setup menu?Does it show any signal on the 82???
wilfredw
03-06-2020, 10:14 PM
Then it must be a DishPro lnb?Do you seethe 82 sat in the setup menu?Does it show any signal on the 82???
Shows a great signal but it's a redline.
The Noof
03-06-2020, 10:24 PM
Shows a great signal but it's a redline.
If you have signal in red, it's in your settings.Post your settings for both sats.
nobodyspecial
03-06-2020, 10:24 PM
Don,t have any, just ditched my bell sub and hooked up to my t5.
correct but you still need to set up your switch settings in your dreamlink to reflect the internal switch on the lnb
wilfredw
03-06-2020, 10:30 PM
91 nimiq lnb power on lnb legacy twin lnb frequently 11.250 the rest off. 82 is the same
The Noof
03-06-2020, 10:35 PM
91 nimiq lnb power on lnb legacy twin lnb frequently 11.250 the rest off. 82 is the same
If you had legacy lnb's, you would have external sw21 switching.You need to find an EXCACT picture on the net of your dish setup & post it.
nobodyspecial
03-06-2020, 10:41 PM
correct but you still need to set up your switch settings in your dreamlink to reflect the internal switch on the lnb
91 nimiq lnb power on lnb legacy twin lnb frequently 11.250 the rest off. 82 is the same
you dont have your switch settings set up
wilfredw
03-06-2020, 10:50 PM
If you had legacy lnb's, you would have external sw21 switching.You need to find an EXCACT picture on the net of your dish setup & post it.
I don,t have a clue how to send pictures
wilfredw
03-06-2020, 10:54 PM
you dont have your switch settings set up
I don,t understand.Both 91 and 82 were working on my bell sub which I ditched yesterday, I thought all I had to do was move the cable to the t5.
wilfredw
03-06-2020, 10:59 PM
Are you saying I need 2 cables running for the dish , I only had 1 for both 91 and 82 on my sub.
The Noof
03-06-2020, 11:07 PM
Are you saying I need 2 cables running for the dish , I only had 1 for both 91 and 82 on my sub.
No sir....did you read my post above????.It seems to me you have no idea of the lnb type you have:there are several choices,depending on how old your installation is.It sounds like you have a DP44.If so, your settings MUST reflect that.
wilfredw
03-06-2020, 11:25 PM
I can see a 2 to 1 switch from the ground,that's all I can give you.To much snow and ice on roof. There are 2 individual lnb,s .About 20 years old.
wilfredw
03-06-2020, 11:32 PM
Suddenly 82 works and 91 is gone and I didn,t change anything.91 quit so I punched in 2400 and tsn came right up.This is to weird.
The Noof
03-06-2020, 11:40 PM
I can see a 2 to 1 switch from the ground,that's all I can give you.To much snow and ice on roof. There are 2 individual lnb,s .
If you see an external switch,2 in/1 out, it must be legacy lnbs & an sw21.Try making your settings to 91 nimiq 1/lnb power on/lnb type single/lnb frequency 11250/lnb 22k on/diseqc off/diseqc off/ legacy sw21 dish 1
Then for the 82:82 nimiq 4/lnb power on/lnb type single/lnb frequency 11250/22k on/diseqc off/diseqc off/legacy sw21 dish 2.
Scan each on its own.
nobodyspecial
03-06-2020, 11:41 PM
Until your settings are correct either and could work
wilfredw
03-06-2020, 11:55 PM
If you see an external switch,2 in/1 out, it must be legacy lnbs & an sw21.Try making your settings to 91 nimiq 1/lnb power on/lnb type single/lnb frequency 11250/lnb 22k on/diseqc off/diseqc off/ legacy sw21 dish 1
Then for the 82:82 nimiq 4/lnb power on/lnb type single/lnb frequency 11250/22k on/diseqc off/diseqc off/legacy sw21 dish 2.
Scan each on its own.
Seems to be OK , took a bit to come alive on 91 but it's up too now.Thanks a million,hope it stays good.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.