X5 Firmware + Buzz 5 App Update September 22nd, 2022

[nobodyspecial]

20220919 Firmware Version
5.0.766 Buzz 5 App Version

PLEASE NOTE YOU CANNOT REVERT BACK

PLEASE NOTE IT WILL TAKE UP TO 20 MINUTES TO DOWNLOAD + INSTALL + REBOOT


Firmware Changes:

- Added support for ARQ200/220/250 Remotes
- Added HDMI CEC settings and Max Volume Shortcut Buttons to Buzz Smart Remote App
- Updated OTA app


Buzz 5 Version 5.0.766 Changes:

- Fixed PVR bugs that would cause recordings to end early on Multi Connection Accounts (XC Login/M3U)
- Optimized PVR for better performance.
- Fixed decoder issue.
- Fixed a rare crash in Backup Player when active cc/audio track was changed by user.
- Fixed a bug on Modern with favorite app icons disappearing.
- Fixed a bug when changing locations with Weather Settings in Buzz Utilities.
- Fixed TMDB Meta Data bugs in VOD/TV Series on some servers.

[gig63]

I am on
5.0.759 Buzz 5App Version
V20220811 Firmware version
I have tried every way on the box to update and everyone says i have the latest update

Thank you so much for your time

[dishuser]

I am on
5.0.759 Buzz 5App Version
V20220811 Firmware version
I have tried every way on the box to update and everyone says i have the latest update

Thank you so much for your time

same
waiting for a response from dev

[dishuser]

give it a try now

[gig63]

Everything went perfect took about 5 minutes
Thank you everyone for your time

[cheff]

Since the update my X5 will not come out of suspend mode.?
When I hit the power button the box shut off with red light now it will only boot up in suspend red light stays on .

I get menu but only pointer / mouse will respond . Box has menu but red light is on


Please help!



Thx,

[cheff]

Any suggestions box has red light menu is on but red light on box

[dishuser]

Any suggestions box has red light menu is on but red light on box

press source button until it turns blue
press and wait several seconds each time

[cheff]

Which button is source would that be the home button?
Thank you.

[dishuser]

Which button is source would that be the home button?
Thank you.

top right button

[dishuser]

so?is it working?

[cheff]

No that did not work but if I boot box with no HDMI cable then connect it works?

[dishuser]

No that did not work but if I boot box with no HDMI cable then connect it works?

did you do auto tv setup?

[cheff]

did you do auto tv setup?

I'm not sure what you mean by auto tv setup I just connect box to my 4k tv worked before fine has something to do with TV for sure because if I connect hdmi cable after box boots up works fine.

Before my box would go into suspend red light when shut off tv now I can't get out of suspend .
The menu comes up on display but box has red light and only the mouse pointer works.

[dishuser]

I'm not sure what you mean by auto tv setup I just connect box to my 4k tv worked before fine has something to do with TV for sure because if I connect hdmi cable after box boots up works fine.

Before my box would go into suspend red light when shut off tv now I can't get out of suspend .
The menu comes up on display but box has red light and only the mouse pointer works.

open buzztv smart remote app

[cheff]

Thanks I never knew about this I did try but went through all 14 never saw volume maybe it's a compatibility issue with my tv.

[dishuser]

Thanks I never knew about this I did try but went through all 14 never saw volume maybe it's a compatibility issue with my tv.

what brand?
are you pointing it at tv?

[cheff]

I tried it again and this time it found it now when I hit volume the tv volume is used also box and tv turns off.
Yes Sir now box comes on when powering on.

I owe you a beer thx sir!

[Borealis]

Hi Dishuser,
I am a newbee and trying to Update my Buzz XRS4900 but always says No Updates Found, Presently the FW is 5.0.603, 9/23/2021 revision. Can you pls help to have my Box updated. Thanks.

[dishuser]

Hi Dishuser,
I am a newbee and trying to Update my Buzz XRS4900 but always says No Updates Found, Presently the FW is 5.0.603, 9/23/2021 revision. Can you pls help to have my Box updated. Thanks.

this thread is about the x5
after checking for updates enter 2015 with remote

[Borealis]

this thread is about the x5
after checking for updates enter 2015 with remote

I have tried the Buzz5 utility System Updates and it comes back with You're running the latest FW for XRS4900, V20211001. Where do I have to enter 2015, can you pls explain, or point me to some info that I can read and learn from. Thank you very much for the Quick reply.

[Ryu]

I have tried the Buzz5 utility System Updates and it comes back with You're running the latest FW for XRS4900, V20211001. Where do I have to enter 2015, can you pls explain, or point me to some info that I can read and learn from. Thank you very much for the Quick reply.

after that message comes back you just type 2015 and keep eyes on box and see what it says.

[dishuser]

I have tried the Buzz5 utility System Updates and it comes back with You're running the latest FW for XRS4900, V20211001. Where do I have to enter 2015, can you pls explain, or point me to some info that I can read and learn from. Thank you very much for the Quick reply.

check the 4900 section in about 30 minutes
I will post a fix once it uploads

[Borealis]

check the 4900 section in about 30 minutes
I will post a fix once it uploads

I have entered "2015" after the no Updates Message, tried again and this time it went to search for the FW but come with Error Message: OTA, Update Checker Error
Error encountered while checking FW for your XRS4900, Error code 100. Pls try again.
Thanks for your Help.

[dishuser]

I have entered "2015" after the no Updates Message, tried again and this time it went to search for the FW but come with Error Message: OTA, Update Checker Error
Error encountered while checking FW for your XRS4900, Error code 100. Pls try again.
Thanks for your Help.

https://www.satfix.to/showthread.php?223677-manually-update-to-v20220106-firmware&p=1357959#post1357959

[Borealis]

https://www.satfix.to/showthread.php?223677-manually-update-to-v20220106-firmware&p=1357959#post1357959

Thank you Very Much DU, I was able to Factory Reset the Box, Reconfigured my Settings, was able to join my Domain and now I see that I have latest FW 5.0.772 update as of 9/29/2022. I have 2 Issues now, 1. Asking me to pair my Remote, tried to follow the screen but it is stuck in "Scanning " was able to back out and I can see the remote is connected in IR mode.
2. Some Italian Channels that I watch don't have the sound only the Video but most of them works fine. I will appreciate if you can help to resole these Issues, other than that Box is Working Fine. Again, Thank you Very Much for your Help. Best Regards.

[dishuser]

Thank you Very Much DU, I was able to Factory Reset the Box, Reconfigured my Settings, was able to join my Domain and now I see that I have latest FW 5.0.772 update as of 9/29/2022. I have 2 Issues now, 1. Asking me to pair my Remote, tried to follow the screen but it is stuck in "Scanning " was able to back out and I can see the remote is connected in IR mode.
2. Some Italian Channels that I watch don't have the sound only the Video but most of them works fine. I will appreciate if you can help to resole these Issues, other than that Box is Working Fine. Again, Thank you Very Much for your Help. Best Regards.

please post in the 4900 section